{"id":34294,"date":"2026-08-08T08:00:05","date_gmt":"2026-08-08T07:00:05","guid":{"rendered":"https:\/\/jelproducts.nl\/?p=34294"},"modified":"2026-08-08T08:00:05","modified_gmt":"2026-08-08T07:00:05","slug":"when-should-you-replace-an-industrial-led-fixture-instead-of-repairing-it","status":"publish","type":"blog","link":"https:\/\/jelproducts.nl\/en\/blog\/wanneer-moet-je-een-industrieel-led-armatuur-vervangen-in-plaats-van-repareren\/","title":{"rendered":"When should you replace an industrial LED luminaire instead of repairing it?"},"content":{"rendered":"<p class=\"wp-block-paragraph\">An industrial LED luminaire is replaced when the repair costs exceed 50 to 60 percent of the replacement value, when critical components are no longer available, or when the luminaire structurally no longer meets the safety requirements of the environment. For industrial environments, an additional criterion applies: if the luminaire jeopardizes the reliability of a 24\/7 operation, waiting is not an option. The questions below help you arrive at the right decision step by step.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">What are the signs that an LED luminaire can no longer be repaired?<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Sometimes the end of a luminaire is clearer than you think. An LED luminaire can no longer be repaired when the driver is completely defective and no longer available, when the luminaire body shows structural damage due to heat, corrosion, or mechanical force, or when the LED module is so degraded that replacement of the entire optical system is necessary. In that case, the repair costs exceed the value of a new luminaire.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Concrete signals that point to the end of life include:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n <li>Visible cracking or deformation of the housing due to extreme temperatures<\/li>\n <li>Severe corrosion that has affected the IP seal or the electrical wiring<\/li>\n <li>Persistent flickering or dropouts not resolved by a driver change<\/li>\n <li>Light output that has decreased by more than 30 percent compared to the initial value (lumen depreciation)<\/li>\n <li>Spare parts no longer supplied by the manufacturer<\/li>\n <li>Luminaires older than 10 to 15 years that have never been overhauled<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">In heavy industrial environments, vibrations, dust, and chemical exposure significantly accelerate this process. A luminaire that still looks visually acceptable may already be internally compromised to the extent that repair only wastes time and money without yielding structural results.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">When is repairing an industrial LED luminaire still worthwhile?<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Not every defect immediately means the end. Repairing makes sense when the defect is limited to a single, easily replaceable component such as a driver or connector, when the luminaire is less than five years old, and when the repair costs remain well below half of the new value. In that case, a targeted repair extends the lifespan without having to make the full investment again.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Repair has the most value in the following situations:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n <li>The luminaire is relatively new and the LED module is still functioning well<\/li>\n <li>Only the driver or a connection component is defective, not the optical system<\/li>\n <li>The luminaire is part of a larger installation that you want to replace in phases<\/li>\n <li>There is a maintenance contract in which the supplier guarantees spare parts<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Please note that repair in hard-to-reach installations, such as on crane structures or in climate chambers, significantly increases labor costs. In those cases, the balance shifts more quickly toward replacement, even if the defect itself is limited.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">How do you calculate the true cost of repairing versus replacing?<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Looking only at the price of a component gives a distorted view. You calculate the true costs by comparing not just the direct material costs, but also the labor costs, the risk of repeated failure, the energy savings of a modern luminaire, and the loss of productivity during downtime. Only then do you get an honest total picture.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">A practical calculation follows these steps:<\/p>\n\n\n\n<ol class=\"wp-block-list\">\n <li><strong>Determine the direct repair costs:<\/strong> parts plus labor, including any crane costs or shutdown of an installation.<\/li>\n <li><strong>Estimate the remaining lifespan after repair:<\/strong> An eight-year-old repaired luminaire has a shorter expected remaining lifespan than a new one.<\/li>\n <li><strong>Calculate the energy difference:<\/strong> Newer LED luminaires are often 20 to 40 percent more energy-efficient than models from five years ago. Multiply that by the number of operating hours per year.<\/li>\n <li><strong>Factor in the chance of repeated failure:<\/strong> If a luminaire has been repaired before, the probability of a subsequent defect increases. Factor in a risk coefficient for this.<\/li>\n <li><strong>Compare with the new value:<\/strong> if the total cost of repair plus expected additional costs amount to more than 50 to 60 percent of a new luminaire, replacement is financially more advantageous.<\/li>\n<\/ol>\n\n\n\n<p class=\"wp-block-paragraph\">For industrial sites with large numbers of luminaires, it pays off to combine this calculation with <a href=\"https:\/\/jelproducts.nl\/en\/lighting-advice\/\">professional lighting advice<\/a>, so that you can simultaneously map the lighting quality and energy consumption of the entire installation.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">What role do extreme environmental conditions play in the replacement decision?<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Not every environment is equally forgiving to lighting. Extreme environmental conditions significantly shorten the lifespan of an LED luminaire and make the replacement decision more urgent. In environments with high temperatures, aggressive chemicals, sea air, or intense vibrations, components degrade faster than in standard environments, meaning the usual life expectancy does not apply.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">In steel mills and foundries, where luminaires are exposed to infrared radiation and ambient temperatures well above 60 degrees Celsius, the driver of a standard luminaire ages in a fraction of its normal lifespan. The same applies to installations in the chemical industry, where vapors slowly corrode the housing and seals. At <a href=\"https:\/\/jelproducts.nl\/en\/lighting-for-extreme-corrosion\/\">lighting in corrosive environments<\/a> the choice of the right material and the correct protection class determines how long a luminaire will remain functional at all.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">For climate chambers and cold stores, where temperature fluctuations of tens of degrees occur daily, condensation and material fatigue affect the housing and connections. In such environments, a higher replacement frequency is not a sign of poor quality, but a realistic expectation that you must factor into your planning.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The practical rule: the more extreme the environment, the sooner you need to make the replacement decision. A luminaire that can still last for years in an office environment may have already reached its economic lifespan in a heavy industrial environment.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">What are the safety and compliance risks of waiting too long to replace?<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Waiting too long to replace an outdated industrial LED luminaire leads to increased safety risks, potential non-compliance with applicable standards, and liability risks in the event of incidents. In industrial environments, inadequate or unreliable lighting is directly linked to the risk of workplace accidents.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The most concrete risks are:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n <li><strong>Reduced visibility:<\/strong> a luminaire with a severely reduced light output no longer meets the minimum lighting levels prescribed in the NEN-EN 12464 standard for workplace lighting.<\/li>\n <li><strong>Fire risk:<\/strong> Faulty drivers or damaged wiring in outdated luminaires can cause overheating, particularly in environments with combustible dust or gases.<\/li>\n <li><strong>Non-compliance in audits:<\/strong> During a safety audit or inspection by the Labor Inspectorate, an installation with demonstrably outdated or defective luminaires can lead to an official notice or temporary shutdown.<\/li>\n <li><strong>Increased liability:<\/strong> if an incident occurs and it can be demonstrated that the lighting no longer met the standards, the liability lies with the responsible organization.<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">For sectors such as <a href=\"https:\/\/jelproducts.nl\/en\/sectors\/heavy-industry-extreme-heat\/\">heavy industry<\/a> and in ports, where operations run 24\/7 with heavy machinery and vehicles, the consequences of inadequate lighting are immediately noticeable in operational safety. Preventive replacement in that context is not a luxury, but an obligation.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">How do you plan a structured replacement of industrial LED lighting?<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">A good replacement schedule starts well before luminaires actually fail. First, set up an inventory of all luminaires with their age, condition, and environmental load, then set priorities based on safety risk and replacement urgency, and finally develop a phased plan that aligns with the maintenance schedule of the installation.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">An effective approach follows this logic:<\/p>\n\n\n\n<ol class=\"wp-block-list\">\n <li><strong>Take an inventory of the current installation:<\/strong> Record the age, number of operating hours, previous repairs, and environmental conditions to which each luminaire has been exposed.<\/li>\n <li><strong>Assess the technical condition:<\/strong> Measure the light output and compare it with the original specifications. Check the housing for corrosion, damage, and the condition of the IP seal.<\/li>\n <li><strong>Set priorities based on risk:<\/strong> Valves in safety-critical zones or with demonstrable defects are given the highest priority, regardless of age.<\/li>\n <li><strong>Link replacement to scheduled maintenance:<\/strong> Replace luminaires preferably during scheduled shutdowns or maintenance stops to prevent additional production losses.<\/li>\n <li><strong>Choose light luminaires that suit the environment:<\/strong> select based on IP rating, IK rating, and temperature resistance. A wrong choice will lead to premature failure again.<\/li>\n <li><strong>Document the new installation:<\/strong> Record the specifications, installation date, and warranty terms so that you have a reliable basis for the next replacement cycle.<\/li>\n<\/ol>\n\n\n\n<p class=\"wp-block-paragraph\">For large sites or complex installations, a lighting plan is a valuable tool. It not only optimizes lighting levels, but also takes into account the energy savings and maintainability of the new installation. More background information on the technical aspects of industrial luminaires can be found on the page <a href=\"https:\/\/jelproducts.nl\/en\/solutions\/\">lighting expertise<\/a>.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Examples from practice: DFDS Terminal Lighting<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">A clear example of how the choice between repairing and replacing works out in practice is provided by the project at DFDS, a major ferry and logistics operator with a busy terminal in use day and night. The existing lighting installation was outdated and showed increasing failures, but the operational environment made unplanned maintenance moments virtually impossible: vehicles, trailers, and ship movements left little room for work on the terminal itself.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The technical challenge lay not only in replacing the luminaires themselves, but also in the environmental requirements: sea air, fluctuating temperatures, and the mechanical stress of a busy port environment placed high demands on the protection class and robustness of the new luminaires. Repairing the existing installation was no longer a viable option, as spare parts were no longer available and corrosion had structurally damaged the housings.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The chosen solution was a complete replacement, linked to scheduled maintenance so that terminal operations experienced minimal disruption. The new luminaires were selected based on their IP rating, corrosion resistance, and light output, tailored to the specific zones of the terminal. The lesson this project underlines: in environments where downtime is costly and environmental conditions are harsh, it pays to make the replacement decision proactively rather than waiting until failure forces you into an uncontrolled intervention. More practical examples can be found at <a href=\"https:\/\/jelproducts.nl\/en\/projects\/\">projects page<\/a>.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">How JEL Products Helps You Decide Between Repair and Replacement<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">JEL Products helps industrial organizations make the right decisions about their lighting systems, from an initial assessment to a full replacement project. The approach is practical and technically sound, and does not recommend unnecessary replacements when repairs would suffice.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">What JEL Products specifically offers:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n <li>Technical assessment of existing installations for condition, safety and remaining lifespan<\/li>\n <li>Lighting design and light calculations tailored to the specific environmental requirements<\/li>\n <li>Supply of high-quality LED luminaires suitable for extreme conditions, from high temperatures to corrosive environments<\/li>\n <li>Management of the complete replacement process, including foundations, lighting poles, installation, and commissioning<\/li>\n <li>Advice on available subsidies and tax schemes such as the <a href=\"https:\/\/jelproducts.nl\/en\/energy-investment-deduction\/\">Energy investment tax credit<\/a><\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Whether it\u2019s a single defective luminaire or a complete redesign of an industrial site, JEL Products works with you to find solutions based on the technical realities of your environment. <a href=\"https:\/\/jelproducts.nl\/en\/contact\/\">Get in touch<\/a> for a no-obligation consultation about the condition of your lighting installation.<\/p>","protected":false},"excerpt":{"rendered":"<p>Repair or replace? The 50% rule and 6 specific signs will help you decide.<\/p>","protected":false},"author":1,"featured_media":36550,"template":"","categories":[],"tags":[],"class_list":["post-34294","blog","type-blog","status-publish","has-post-thumbnail","hentry"],"yoast_head":"<!-- This site is optimized with the Yoast SEO Premium plugin v28.4 (Yoast SEO v28.4) - https:\/\/yoast.com\/product\/yoast-seo-premium-wordpress\/ -->\n<title>Wanneer moet je een industrieel LED-armatuur vervangen in plaats van repareren? | JEL Products<\/title>\n<meta name=\"description\" content=\"Industrieel LED-armatuur repareren of vervangen? Ontdek de 50%-regel, kostencalculatie en veiligheidsrisico&#039;s voor de juiste beslissing.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/jelproducts.nl\/en\/blog\/when-should-you-replace-an-industrial-led-fixture-instead-of-repairing-it\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Wanneer moet je een industrieel LED-armatuur vervangen in plaats van repareren?\" \/>\n<meta property=\"og:description\" content=\"Industrieel LED-armatuur repareren of vervangen? Ontdek de 50%-regel, kostencalculatie en veiligheidsrisico&#039;s voor de juiste beslissing.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/jelproducts.nl\/en\/blog\/when-should-you-replace-an-industrial-led-fixture-instead-of-repairing-it\/\" \/>\n<meta property=\"og:site_name\" content=\"JEL Products\" \/>\n<meta property=\"og:image\" content=\"https:\/\/jelproducts.nl\/wp-content\/uploads\/2026\/07\/SEO-_-Algemeen-JEL-Products.webp\" \/>\n\t<meta property=\"og:image:width\" content=\"1000\" \/>\n\t<meta property=\"og:image:height\" content=\"1000\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/webp\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data1\" content=\"8 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/jelproducts.nl\\\/blog\\\/wanneer-moet-je-een-industrieel-led-armatuur-vervangen-in-plaats-van-repareren\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/jelproducts.nl\\\/blog\\\/wanneer-moet-je-een-industrieel-led-armatuur-vervangen-in-plaats-van-repareren\\\/\"},\"author\":{\"name\":\"Lucas de Graaf, BSc\",\"@id\":\"https:\\\/\\\/jelproducts.nl\\\/en\\\/#\\\/schema\\\/person\\\/2c07b1a0a513f8b8a5dc9e1540754f39\"},\"headline\":\"Wanneer moet je een industrieel LED-armatuur vervangen in plaats van repareren?\",\"datePublished\":\"2026-08-08T07:00:05+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/jelproducts.nl\\\/blog\\\/wanneer-moet-je-een-industrieel-led-armatuur-vervangen-in-plaats-van-repareren\\\/\"},\"wordCount\":1696,\"publisher\":{\"@id\":\"https:\\\/\\\/jelproducts.nl\\\/en\\\/#organization\"},\"image\":{\"@id\":\"https:\\\/\\\/jelproducts.nl\\\/blog\\\/wanneer-moet-je-een-industrieel-led-armatuur-vervangen-in-plaats-van-repareren\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/jelproducts.nl\\\/wp-content\\\/uploads\\\/2026\\\/07\\\/SEO-_-Algemeen-JEL-Products.webp\",\"inLanguage\":\"en-US\",\"dateModified\":\"2026-08-08T07:00:05+00:00\"},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/jelproducts.nl\\\/blog\\\/wanneer-moet-je-een-industrieel-led-armatuur-vervangen-in-plaats-van-repareren\\\/\",\"url\":\"https:\\\/\\\/jelproducts.nl\\\/en\\\/blog\\\/when-should-you-replace-an-industrial-led-fixture-instead-of-repairing-it\\\/\",\"name\":\"Wanneer moet je een industrieel LED-armatuur vervangen in plaats van repareren? | JEL Products\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/jelproducts.nl\\\/en\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/jelproducts.nl\\\/blog\\\/wanneer-moet-je-een-industrieel-led-armatuur-vervangen-in-plaats-van-repareren\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/jelproducts.nl\\\/blog\\\/wanneer-moet-je-een-industrieel-led-armatuur-vervangen-in-plaats-van-repareren\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/jelproducts.nl\\\/wp-content\\\/uploads\\\/2026\\\/07\\\/SEO-_-Algemeen-JEL-Products.webp\",\"datePublished\":\"2026-08-08T07:00:05+00:00\",\"description\":\"Industrieel LED-armatuur repareren of vervangen? Ontdek de 50%-regel, kostencalculatie en veiligheidsrisico's voor de juiste beslissing.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/jelproducts.nl\\\/blog\\\/wanneer-moet-je-een-industrieel-led-armatuur-vervangen-in-plaats-van-repareren\\\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/jelproducts.nl\\\/blog\\\/wanneer-moet-je-een-industrieel-led-armatuur-vervangen-in-plaats-van-repareren\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/jelproducts.nl\\\/blog\\\/wanneer-moet-je-een-industrieel-led-armatuur-vervangen-in-plaats-van-repareren\\\/#primaryimage\",\"url\":\"https:\\\/\\\/jelproducts.nl\\\/wp-content\\\/uploads\\\/2026\\\/07\\\/SEO-_-Algemeen-JEL-Products.webp\",\"contentUrl\":\"https:\\\/\\\/jelproducts.nl\\\/wp-content\\\/uploads\\\/2026\\\/07\\\/SEO-_-Algemeen-JEL-Products.webp\",\"width\":1000,\"height\":1000,\"caption\":\"Logo van JEL Products\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/jelproducts.nl\\\/blog\\\/wanneer-moet-je-een-industrieel-led-armatuur-vervangen-in-plaats-van-repareren\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/jelproducts.nl\\\/nl\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"blogs\",\"item\":\"https:\\\/\\\/jelproducts.nl\\\/nl\\\/blog\\\/\"},{\"@type\":\"ListItem\",\"position\":3,\"name\":\"Wanneer moet je een industrieel LED-armatuur vervangen in plaats van repareren?\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/jelproducts.nl\\\/en\\\/#website\",\"url\":\"https:\\\/\\\/jelproducts.nl\\\/en\\\/\",\"name\":\"JEL Products\",\"description\":\"Verlichting voor extreme omstandigheden\",\"publisher\":{\"@id\":\"https:\\\/\\\/jelproducts.nl\\\/en\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/jelproducts.nl\\\/en\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/jelproducts.nl\\\/en\\\/#organization\",\"name\":\"JEL Products\",\"alternateName\":[\"JEL\",\"JELproducts\",\"JEL Products B.V.\"],\"url\":\"https:\\\/\\\/jelproducts.nl\\\/en\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/jelproducts.nl\\\/en\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/jelproducts.nl\\\/wp-content\\\/uploads\\\/2026\\\/07\\\/logo.webp\",\"contentUrl\":\"https:\\\/\\\/jelproducts.nl\\\/wp-content\\\/uploads\\\/2026\\\/07\\\/logo.webp\",\"width\":1000,\"height\":1000,\"caption\":\"JEL Products\"},\"image\":{\"@id\":\"https:\\\/\\\/jelproducts.nl\\\/en\\\/#\\\/schema\\\/logo\\\/image\\\/\"},\"sameAs\":[\"https:\\\/\\\/www.linkedin.com\\\/company\\\/jelproducts\\\/\",\"https:\\\/\\\/www.youtube.com\\\/channel\\\/UCCBEGfbI72RFq71R7fOn40w\"],\"description\":\"JEL Products is een Nederlandse specialist in industri\u00eble LED-verlichting voor zware en corrosieve omstandigheden. Wij leveren verlichtingssystemen voor havens en terminals, offshore en maritieme operaties, kranen, zware industrie, bouw en infrastructuur, en combineren lichtadvies, engineering, levering en installatieondersteuning in \u00e9\u00e9n traject. Onder de merken DCbright en DarkLicht ontwikkelen wij armaturen die bestand zijn tegen zoutbelasting, trillingen, hoge temperaturen en impact, met aandacht voor het beperken van lichthinder.\",\"email\":\"info@jelproducts.nl\",\"telephone\":\"+31337859809\",\"legalName\":\"JEL Products B.V.\",\"foundingDate\":\"2019-11\",\"vatID\":\"NL868734743B01\",\"taxID\":\"98987615\",\"duns\":\"47-366-4614\",\"numberOfEmployees\":{\"@type\":\"QuantitativeValue\",\"minValue\":\"1\",\"maxValue\":\"10\"},\"publishingPrinciples\":\"https:\\\/\\\/jelproducts.nl\\\/nl\\\/onze-keurmerken\\\/\",\"actionableFeedbackPolicy\":\"https:\\\/\\\/jelproducts.nl\\\/nl\\\/privacy\\\/\",\"correctionsPolicy\":\"https:\\\/\\\/jelproducts.nl\\\/nl\\\/disclaimer\\\/\",\"ethicsPolicy\":\"https:\\\/\\\/jelproducts.nl\\\/nl\\\/disclaimer\\\/\",\"diversityPolicy\":\"https:\\\/\\\/jelproducts.nl\\\/nl\\\/onze-keurmerken\\\/\",\"diversityStaffingReport\":\"https:\\\/\\\/jelproducts.nl\\\/nl\\\/disclaimer\\\/\",\"address\":{\"@type\":\"PostalAddress\",\"streetAddress\":\"Amp\u00e8restraat 19E\",\"postalCode\":\"3861 NC\",\"addressLocality\":\"Nijkerk\",\"addressRegion\":\"Gelderland\",\"addressCountry\":\"NL\"},\"contactPoint\":[{\"@type\":\"ContactPoint\",\"contactType\":\"sales\",\"telephone\":\"+31337859809\",\"email\":\"info@jelproducts.nl\",\"availableLanguage\":[\"nl\",\"en\",\"de\",\"fr\",\"es\"],\"areaServed\":\"Worldwide\"}],\"founder\":[{\"@id\":\"https:\\\/\\\/jelproducts.nl\\\/#\\\/schema\\\/persoon\\\/jaap-de-graaf\"},{\"@id\":\"https:\\\/\\\/jelproducts.nl\\\/#\\\/schema\\\/persoon\\\/lucas-de-graaf\"}],\"memberOf\":[{\"@type\":\"Organization\",\"name\":\"NSVV, Nederlandse Stichting Voor Verlichtingskunde\",\"url\":\"https:\\\/\\\/nsvv.nl\\\/\"},{\"@type\":\"Organization\",\"name\":\"OVLNL\",\"url\":\"https:\\\/\\\/www.ovlnl.nl\\\/\"},{\"@type\":\"Organization\",\"name\":\"Netherlands Maritime Technology\",\"url\":\"https:\\\/\\\/www.maritimetechnology.nl\\\/\"}]},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/jelproducts.nl\\\/en\\\/#\\\/schema\\\/person\\\/2c07b1a0a513f8b8a5dc9e1540754f39\",\"name\":\"Lucas de Graaf, BSc\",\"pronouns\":\"hij\\\/hem\",\"description\":\"Lucas de Graaf is oprichter en technisch directeur van JEL Products, een Nederlands bedrijf dat duurzame en doordachte verlichtingsoplossingen levert voor de meest veeleisende industri\u00eble omgevingen, waaronder mijnbouw, verticaal transport, offshore, havens, infrastructuur en bouw. Sinds de oprichting in 2019 richt hij zich op het combineren van hoogwaardige producten (de merken DCBright en DarkLicht) met diepgaand technisch advies, om tot oplossingen te komen die de verwachtingen van klanten overtreffen. Naast zijn werk bij JEL Products is Lucas vicevoorzitter van het Kernteam Outdoor van de NSVV, de Nederlandse Stichting voor Verlichtingskunde. In die rol vertaalt hij praktijkervaring naar technisch onderbouwde en maatschappelijk relevante richtlijnen, met focus op het verminderen van lichthinder, het verbeteren van veiligheid en het ontwikkelen van toekomstbestendige verlichting. Hij studeerde Entrepreneurship &amp; Retail Management aan Hogeschool Windesheim en behaalde een Lean Six Sigma Green Belt.\",\"sameAs\":[\"https:\\\/\\\/www.jelproducts.nl\",\"https:\\\/\\\/www.linkedin.com\\\/in\\\/lucas-de-graaf\\\/\",\"https:\\\/\\\/www.youtube.com\\\/@jelproducts\"],\"honorificSuffix\":\"BSc\",\"gender\":\"Male\",\"knowsAbout\":[\"Industri\u00eble buitenverlichting\",\"Terminal- en havenverlichting\",\"Kraanverlichting en verticaal transport\",\"Verlichting bij hoge temperaturen\",\"Lichthinder en duisternis\",\"Lichtberekeningen en DIALux\",\"NEN-EN 12464-2\",\"EN 13201-2\",\"Offshore- en maritieme verlichting\",\"Lichtmasten en terreinverlichting\",\"LED-armaturen en driverlevensduur\"],\"knowsLanguage\":[\"Nederlands\",\"Engels\",\"Duits\"],\"jobTitle\":\"Technisch Directeur\",\"worksFor\":\"JEL Products B.V.\",\"url\":\"https:\\\/\\\/jelproducts.nl\\\/en\\\/overons\\\/lucas-de-graaf\\\/\",\"image\":{\"@type\":\"ImageObject\",\"@id\":\"https:\\\/\\\/jelproducts.nl\\\/en\\\/#\\\/schema\\\/person\\\/2c07b1a0a513f8b8a5dc9e1540754f39\\\/foto\",\"url\":\"https:\\\/\\\/jelproducts.nl\\\/wp-content\\\/uploads\\\/2026\\\/03\\\/Lucas-de-Graaf-nieuw_v1-jpg.webp\",\"contentUrl\":\"https:\\\/\\\/jelproducts.nl\\\/wp-content\\\/uploads\\\/2026\\\/03\\\/Lucas-de-Graaf-nieuw_v1-jpg.webp\",\"width\":666,\"height\":667,\"caption\":\"Lucas de Graaf, BSc\"}}]}<\/script>\n<!-- \/ Yoast SEO Premium plugin. -->","yoast_head_json":{"title":"When Should You Replace an Industrial LED Luminaire Instead of Repairing It? | JEL Products","description":"Should you repair or replace an industrial LED luminaire? Learn about the 50% rule, cost estimates, and safety risks to make the right decision.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/jelproducts.nl\/en\/blog\/when-should-you-replace-an-industrial-led-fixture-instead-of-repairing-it\/","og_locale":"en_US","og_type":"article","og_title":"Wanneer moet je een industrieel LED-armatuur vervangen in plaats van repareren?","og_description":"Industrieel LED-armatuur repareren of vervangen? Ontdek de 50%-regel, kostencalculatie en veiligheidsrisico's voor de juiste beslissing.","og_url":"https:\/\/jelproducts.nl\/en\/blog\/when-should-you-replace-an-industrial-led-fixture-instead-of-repairing-it\/","og_site_name":"JEL Products","og_image":[{"width":1000,"height":1000,"url":"https:\/\/jelproducts.nl\/wp-content\/uploads\/2026\/07\/SEO-_-Algemeen-JEL-Products.webp","type":"image\/webp"}],"twitter_card":"summary_large_image","twitter_misc":{"Est. reading time":"8 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/jelproducts.nl\/blog\/wanneer-moet-je-een-industrieel-led-armatuur-vervangen-in-plaats-van-repareren\/#article","isPartOf":{"@id":"https:\/\/jelproducts.nl\/blog\/wanneer-moet-je-een-industrieel-led-armatuur-vervangen-in-plaats-van-repareren\/"},"author":{"name":"Lucas de Graaf, BSc","@id":"https:\/\/jelproducts.nl\/en\/#\/schema\/person\/2c07b1a0a513f8b8a5dc9e1540754f39"},"headline":"Wanneer moet je een industrieel LED-armatuur vervangen in plaats van repareren?","datePublished":"2026-08-08T07:00:05+00:00","mainEntityOfPage":{"@id":"https:\/\/jelproducts.nl\/blog\/wanneer-moet-je-een-industrieel-led-armatuur-vervangen-in-plaats-van-repareren\/"},"wordCount":1696,"publisher":{"@id":"https:\/\/jelproducts.nl\/en\/#organization"},"image":{"@id":"https:\/\/jelproducts.nl\/blog\/wanneer-moet-je-een-industrieel-led-armatuur-vervangen-in-plaats-van-repareren\/#primaryimage"},"thumbnailUrl":"https:\/\/jelproducts.nl\/wp-content\/uploads\/2026\/07\/SEO-_-Algemeen-JEL-Products.webp","inLanguage":"en-US","dateModified":"2026-08-08T07:00:05+00:00"},{"@type":"WebPage","@id":"https:\/\/jelproducts.nl\/blog\/wanneer-moet-je-een-industrieel-led-armatuur-vervangen-in-plaats-van-repareren\/","url":"https:\/\/jelproducts.nl\/en\/blog\/when-should-you-replace-an-industrial-led-fixture-instead-of-repairing-it\/","name":"When Should You Replace an Industrial LED Luminaire Instead of Repairing It? | JEL Products","isPartOf":{"@id":"https:\/\/jelproducts.nl\/en\/#website"},"primaryImageOfPage":{"@id":"https:\/\/jelproducts.nl\/blog\/wanneer-moet-je-een-industrieel-led-armatuur-vervangen-in-plaats-van-repareren\/#primaryimage"},"image":{"@id":"https:\/\/jelproducts.nl\/blog\/wanneer-moet-je-een-industrieel-led-armatuur-vervangen-in-plaats-van-repareren\/#primaryimage"},"thumbnailUrl":"https:\/\/jelproducts.nl\/wp-content\/uploads\/2026\/07\/SEO-_-Algemeen-JEL-Products.webp","datePublished":"2026-08-08T07:00:05+00:00","description":"Should you repair or replace an industrial LED luminaire? Learn about the 50% rule, cost estimates, and safety risks to make the right decision.","breadcrumb":{"@id":"https:\/\/jelproducts.nl\/blog\/wanneer-moet-je-een-industrieel-led-armatuur-vervangen-in-plaats-van-repareren\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/jelproducts.nl\/blog\/wanneer-moet-je-een-industrieel-led-armatuur-vervangen-in-plaats-van-repareren\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/jelproducts.nl\/blog\/wanneer-moet-je-een-industrieel-led-armatuur-vervangen-in-plaats-van-repareren\/#primaryimage","url":"https:\/\/jelproducts.nl\/wp-content\/uploads\/2026\/07\/SEO-_-Algemeen-JEL-Products.webp","contentUrl":"https:\/\/jelproducts.nl\/wp-content\/uploads\/2026\/07\/SEO-_-Algemeen-JEL-Products.webp","width":1000,"height":1000,"caption":"Logo van JEL Products"},{"@type":"BreadcrumbList","@id":"https:\/\/jelproducts.nl\/blog\/wanneer-moet-je-een-industrieel-led-armatuur-vervangen-in-plaats-van-repareren\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/jelproducts.nl\/nl\/"},{"@type":"ListItem","position":2,"name":"blogs","item":"https:\/\/jelproducts.nl\/nl\/blog\/"},{"@type":"ListItem","position":3,"name":"Wanneer moet je een industrieel LED-armatuur vervangen in plaats van repareren?"}]},{"@type":"WebSite","@id":"https:\/\/jelproducts.nl\/en\/#website","url":"https:\/\/jelproducts.nl\/en\/","name":"JEL Products","description":"Lighting for extreme conditions","publisher":{"@id":"https:\/\/jelproducts.nl\/en\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/jelproducts.nl\/en\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/jelproducts.nl\/en\/#organization","name":"JEL Products","alternateName":["JEL","JELproducts","JEL Products B.V."],"url":"https:\/\/jelproducts.nl\/en\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/jelproducts.nl\/en\/#\/schema\/logo\/image\/","url":"https:\/\/jelproducts.nl\/wp-content\/uploads\/2026\/07\/logo.webp","contentUrl":"https:\/\/jelproducts.nl\/wp-content\/uploads\/2026\/07\/logo.webp","width":1000,"height":1000,"caption":"JEL Products"},"image":{"@id":"https:\/\/jelproducts.nl\/en\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.linkedin.com\/company\/jelproducts\/","https:\/\/www.youtube.com\/channel\/UCCBEGfbI72RFq71R7fOn40w"],"description":"JEL Products is a Dutch specialist in industrial LED lighting for harsh and corrosive environments. We supply lighting systems for ports and terminals, offshore and maritime operations, cranes, heavy industry, construction, and infrastructure, and combine lighting consultation, engineering, delivery, and installation support into a single process. Under the DCbright and DarkLicht brands, we develop luminaires that are resistant to salt exposure, vibrations, high temperatures, and impact, with a focus on minimizing light pollution.","email":"info@jelproducts.nl","telephone":"+31337859809","legalName":"JEL Products B.V.","foundingDate":"2019-11","vatID":"NL868734743B01","taxID":"98987615","duns":"47-366-4614","numberOfEmployees":{"@type":"QuantitativeValue","minValue":"1","maxValue":"10"},"publishingPrinciples":"https:\/\/jelproducts.nl\/nl\/onze-keurmerken\/","actionableFeedbackPolicy":"https:\/\/jelproducts.nl\/nl\/privacy\/","correctionsPolicy":"https:\/\/jelproducts.nl\/nl\/disclaimer\/","ethicsPolicy":"https:\/\/jelproducts.nl\/nl\/disclaimer\/","diversityPolicy":"https:\/\/jelproducts.nl\/nl\/onze-keurmerken\/","diversityStaffingReport":"https:\/\/jelproducts.nl\/nl\/disclaimer\/","address":{"@type":"PostalAddress","streetAddress":"Amp\u00e8restraat 19E","postalCode":"3861 NC","addressLocality":"Nijkerk","addressRegion":"Gelderland","addressCountry":"NL"},"contactPoint":[{"@type":"ContactPoint","contactType":"sales","telephone":"+31337859809","email":"info@jelproducts.nl","availableLanguage":["nl","en","de","fr","es"],"areaServed":"Worldwide"}],"founder":[{"@id":"https:\/\/jelproducts.nl\/#\/schema\/persoon\/jaap-de-graaf"},{"@id":"https:\/\/jelproducts.nl\/#\/schema\/persoon\/lucas-de-graaf"}],"memberOf":[{"@type":"Organization","name":"NSVV, Nederlandse Stichting Voor Verlichtingskunde","url":"https:\/\/nsvv.nl\/"},{"@type":"Organization","name":"OVLNL","url":"https:\/\/www.ovlnl.nl\/"},{"@type":"Organization","name":"Netherlands Maritime Technology","url":"https:\/\/www.maritimetechnology.nl\/"}]},{"@type":"Person","@id":"https:\/\/jelproducts.nl\/en\/#\/schema\/person\/2c07b1a0a513f8b8a5dc9e1540754f39","name":"Lucas de Graaf, BSc","pronouns":"hij\/hem","description":"Lucas de Graaf is the founder and technical director of JEL Products, a Dutch company that provides sustainable and well-designed lighting solutions for the most demanding industrial environments, including mining, vertical transportation, offshore, ports, infrastructure, and construction. Since its founding in 2019, he has focused on combining high-quality products (the DCBright and DarkLicht brands) with in-depth technical advice to deliver solutions that exceed customer expectations. In addition to his work at JEL Products, Lucas serves as vice-chair of the Outdoor Core Team at the NSVV, the Dutch Foundation for Lighting Science. In that role, he translates practical experience into technically sound and socially relevant guidelines, with a focus on reducing light pollution, improving safety, and developing future-proof lighting. He studied Entrepreneurship &amp; Retail Management at Windesheim University of Applied Sciences and earned a Lean Six Sigma Green Belt.","sameAs":["https:\/\/www.jelproducts.nl","https:\/\/www.linkedin.com\/in\/lucas-de-graaf\/","https:\/\/www.youtube.com\/@jelproducts"],"honorificSuffix":"BSc","gender":"Male","knowsAbout":["Industri\u00eble buitenverlichting","Terminal- en havenverlichting","Kraanverlichting en verticaal transport","Verlichting bij hoge temperaturen","Lichthinder en duisternis","Lichtberekeningen en DIALux","NEN-EN 12464-2","EN 13201-2","Offshore- en maritieme verlichting","Lichtmasten en terreinverlichting","LED-armaturen en driverlevensduur"],"knowsLanguage":["Nederlands","Engels","Duits"],"jobTitle":"Technisch Directeur","worksFor":"JEL Products B.V.","url":"https:\/\/jelproducts.nl\/en\/overons\/lucas-de-graaf\/","image":{"@type":"ImageObject","@id":"https:\/\/jelproducts.nl\/en\/#\/schema\/person\/2c07b1a0a513f8b8a5dc9e1540754f39\/foto","url":"https:\/\/jelproducts.nl\/wp-content\/uploads\/2026\/03\/Lucas-de-Graaf-nieuw_v1-jpg.webp","contentUrl":"https:\/\/jelproducts.nl\/wp-content\/uploads\/2026\/03\/Lucas-de-Graaf-nieuw_v1-jpg.webp","width":666,"height":667,"caption":"Lucas de Graaf, BSc"}}]}},"_links":{"self":[{"href":"https:\/\/jelproducts.nl\/en\/wp-json\/wp\/v2\/blog\/34294","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/jelproducts.nl\/en\/wp-json\/wp\/v2\/blog"}],"about":[{"href":"https:\/\/jelproducts.nl\/en\/wp-json\/wp\/v2\/types\/blog"}],"author":[{"embeddable":true,"href":"https:\/\/jelproducts.nl\/en\/wp-json\/wp\/v2\/users\/1"}],"version-history":[{"count":1,"href":"https:\/\/jelproducts.nl\/en\/wp-json\/wp\/v2\/blog\/34294\/revisions"}],"predecessor-version":[{"id":35226,"href":"https:\/\/jelproducts.nl\/en\/wp-json\/wp\/v2\/blog\/34294\/revisions\/35226"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/jelproducts.nl\/en\/wp-json\/wp\/v2\/media\/36550"}],"wp:attachment":[{"href":"https:\/\/jelproducts.nl\/en\/wp-json\/wp\/v2\/media?parent=34294"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/jelproducts.nl\/en\/wp-json\/wp\/v2\/categories?post=34294"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/jelproducts.nl\/en\/wp-json\/wp\/v2\/tags?post=34294"}],"curies":[{"name":"WP","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}