DLS - LED Worklight

Non-glare LED Worklight for optimum workplace lighting

01.
Non-glare LED work lights

Power:  30 watts
Brightness: 4,800 lumens
Lens angles: Full cutoff reflector
Colour temperature: 5000K - 2200K

Highly reliable LED work light

The DLS, aka DarkLight S is a non-glare LED work light which is specially designed to provide bright light without blinding the driver or surroundings. At just 30W and a whopping 4,800 lumens, the DarkLicht S offers exceptionally high light output for its compact size. This full-cutoff lamp directs all light to your work surface in a targeted manner, so you can see more than you ever imagined without unnecessary light scattering.

Suitable for 12-36V power supply, the DarkLicht S fits perfectly on a variety of machines and vehicles, from compact shovels and forklifts to service trucks and small off-road vehicles. This not only increases safety and productivity, but also contributes to a pleasant, glare-free working environment.

Full-Cutoff: illuminated without glare

The DarkLicht S work light uses an innovative reflector system instead of traditional lenses. This full-cutoff approach ensures that no light escapes upwards or sideways, but is focused exclusively on the area you want to illuminate. This keeps the driver's vision unobstructed and bystanders from being blinded. The result is comfortable, safe and highly efficient lighting, without unwanted light scattering or light pollution.

Power:  30 watts
Brightness: 4,800 lumens
Lens angles: Full cutoff reflector
Colour temperature: 5000K - 2200K

These companies already operate glare-free

0 lm

Extremely bright, glare-free and compact LED work light

DLS-30 | 30W | 12-36V

Glare-free working light, robust and reliable

These features make the S30 unique

  • Power: 30W
  • Brightness: 4,800 lumens
  • Net efficiency: 160 lumens/Watt
  • Lighting control: Fully light-shielded reflector optics
  • Colour temperature: 5000K | 4000K | 2700K | 2200K
  • Guarantee: 5 years with heavy use
  • Degrees of protection: IP69K & IK10
  •  Assembly: 12-36V (10-50VDC)
 

Advantages:

  • Conformity with Standards: With sufficient DarkLicht S30 LED work lights, you can meet the requirements of the EN 12464-2 standard for safe working lighting.
  • Reports and Advice: We can produce detailed reports demonstrating that our lighting meets this standard, supporting your insurance and licensing process.
  • Efficient light distribution: Maximum illumination in your workplace with minimum energy, thanks to 160 lm/W and our proprietary designed reflector.
  • Indestructibly strong: The housing is a further development from our successful DarkLicht M models in worklight size up to a whopping 48,000 net lumens. Designed for, and proven in, the Australian mining industry.
  • Full light shielding: With the unique reflector optic, the light beam is cut off hard on all sides, preventing light pollution. This ensures higher safety in the workplace.

Applications:

The DarkLicht S LED work light is built for applications where the maximum achievable amount of light in small size is important. With its full light-shielding properties, the light from this small LED work light is used to its full potential. With its robust housing, it is perfect for:

  • Forklifts or reach trucks: Clear visibility during loading and unloading operations in warehouses or outdoor areas.
  • Service and maintenance vehicles: For mechanics and technicians working at night or in dark conditions, without blinding colleagues or passing traffic.
  • Agricultural vehicles: Provides accurate lighting when ploughing, harvesting or transporting on farms and fields.
  • Small Offroad and Recreational Vehicles: Increases visibility in rough terrain, without disturbing light beams for other road users.
  • Lifts and Small Lifting Applications: Optimises visibility when accurately positioning and moving loads.
  • Shovels and excavators: Ensures clear visibility during earthmoving and loading operations.
  • Cranes and lifting applications: Improves visibility on load and working environment, increases safety.
  • Earth-moving equipment: Gives operators clear visibility of obstacles and terrain conditions.
 
Try the DarkLicht S for yourself by contacting us, and experience the difference.
Darklight M30 glare-free work light
02.
Work lights built not to fail

Innovative Dutch design

At JEL Products is all about quality, innovation and service. With the DarkLicht S LED work light, you get a product that not only illuminates brightly and efficiently, but is also carefully tailored to your working environment. We offer personal advice, testing options and support during installation and maintenance. By choosing JEL Products, you are investing in a sustainable solution that makes working in dark conditions safer and more pleasant. We can give you a guarantee on:

  • Robust and affordable work lamp: IP69K and IK10 resistant work light with 4,800 lumens.
  • Durability and Reliability: Proven to perform in demanding environments, for over 4 years our DarkLicht work lights have been used to provide light pollution-free lighting of construction and work sites in Europe, Middle East, Africa, Australia and America.
 

Experience for yourself why DarkLicht S more than lives up to its reputation as a glare-free LED work light.

Glare-free thanks to DLS LED worklights

Forward-thinking builders, earth movers, farmers and drivers choose our lighting to maximise workplace safety and really see where they are working. Never be blinded by bright work lights again or stand in the dark due to broken and inadequate bulbs. Avoid expensive replacement and choose a work lamp that does last throughout your work. Essential in a time when sustainability and environmental awareness are paramount.

Thanks to the inventive cooling fins on the rear, heat dissipation is optimally controlled, keeping the LEDs performing at top level at all times. Recent tests even show that the net light output of the DarkLicht S LED worklights up to three times brighter may be than those of other work lamps on the market.

When using LED worklights, always check EN 12464-2 for safe lighting of your outdoor industrial workplace

The EN 12464-2 is the European standard for lighting and illumination of outdoor workplaces. This standard specifies the requirements for good lighting on construction sites, work areas and outdoor areas to ensure the safety and well-being of workers. It sets guidelines for minimum illuminance, uniformity and colour rendering.

Why is this important for businesses?

  • Worker safety: Sufficient lighting reduces the risk of accidents.
  • Legal compliance: Failure to meet the standard can lead to legal consequences and fines. In addition, you are fully liable in the event of an accident with inadequate lighting.
  • Efficiency and productivity: Good lighting improves visibility, making work more efficient and accurate.
  • Image and reputation: Companies that comply with safety standards and environmental requirements show their commitment to the welfare of their employees and the environment. 
 

Our lighting solutions are designed to meet the requirements of the European-made standard EN 12464-2, allowing you to build your projects with confidence.

03.
Controlled light works better

This unique reflector optic ensures the light gets where it belongs

The DarkLicht S work light uses an innovative reflector system instead of traditional lenses. This full-cutoff approach ensures that no light escapes upwards or sideways, but is focused exclusively on the area you want to illuminate. This keeps the driver's vision unobstructed and bystanders from being blinded. The result is comfortable, safe and highly efficient lighting, without unwanted light scattering or light pollution.

DarkLight S-series - Light Angle Adjustment

DarkLight S Reflector pictured
Full cut-off after 75 degrees forward angle

04.
Do you have a question?

Frequently asked questions

Yes, the DarkLicht S works on 12-36VDC, allowing you to easily power it through your vehicle or machine's electrical system.

Full-cutoff means that all light is directed down or forward, with no light escaping in an upward direction. This prevents glare to drivers and bystanders and minimises light pollution.

Yes, with a sturdy housing and high IP rating, the DarkLicht S is resistant to dust, water and extreme weather conditions.

Our luminaires are energy-efficient, have a long lifespan and are designed to prevent light pollution. This reduces energy consumption, CO2 emissions and impact on local ecosystems, contributing to sustainable and environmentally conscious building practices.

Yes, we operate in the global market and can supply our products and services worldwide. Our international experience enables us to meet the needs of construction companies and crane rental companies around the world.

As standard, all our products have 5 years industrial use guarantee. This means that during heavy use on construction sites, the luminaires are covered by our comprehensive warranty.

Yes, we offer our work lamps with lower colour temperatures such as 2200K, which are less disruptive to flora and fauna. This makes it possible to carry out construction projects in or near natural areas without negatively impacting the ecosystem.

With an expected lifetime of 100,000 hours (about 15 years with heavy use) and robust build quality, you will benefit from this work lamp for a long time.

Price depends on model, specifications and any additional options. Please contact our sales using the contact details below. At present, you can only request prices from us by phone or email.

05.
Technical Specifications

DarkLight S

Available in DC voltage only

DLS | 30W | 12-36V

06.
Get in touch

Do you also want to put your machines in a good light?

Are you interested in the DarkLicht S LED work light or would you like to know more about other lighting solutions?
Our experts are ready to help you make the right choice for your application.

Thomas van Bakel

Director of International Affairs

Direct Mobile:
+316 3638 3906

Jaap-de-Graaf-new

Jaap de Graaf

Managing director | CEO

Direct Mobile:
+316 5377 0598

Photo of technical director, friendly young man

Lucas de Graaf

Technical director | CTO

Direct Mobile:
+316 1054 4770

07.
All our LED work lights at a glance

Looking for another work lamp?

DL-M (<48,000lm)

High-performance work lights with reflector optics for full light shielding outside the beam. Very interesting for use on machines where glare must be avoided.

These work lights are widely used on: asphalt machines, shovels, harbour cranes, reach stackers and forklifts.

Piranha (8,400lm)

Extremely robust work lamps with an indestructible reputation, you choose these work lamps if you don't want any more damage. These are very interesting for mining and other heavy use.

These work lamps are widely used for impact-oriented purposes in mining, steel industry and bulk terminals.

Goby (6,300 lm)

Very robust and compact work lights for universal use, these work lights come at an attractive price. Goby's are very interesting for trailers, construction machinery and earthworks.

These work lights are widely used on: off-road vehicles, RHIBs, trailers, rollers, reach stackers and forklifts.

08.

Together into one working solution

Results are guaranteed with our lighting solutions

Discover the power of JEL Products and its industrial LED lighting solutions for greater savings in energy, costs, and CO2 emissions while improving your work safety. Contact us today by filling in the form below so we can support you in lighting your working environment in the best possible way.