033 785 9809

JEL-Products-2022

Lighting for the mobile light tower

Efficient LED floodlights with the most precise light control

The (mobile) lighting mast comes in many different shapes and sizes. This is because a lighting column has a wide range of uses. However, all lighting columns have the same purpose, namely to illuminate the project site during the dark hours of the day or in the evening. Because work often depends on this, there must be sufficient lighting at all times. In addition, there are often additional requirements and wishes on site, such as limiting light nuisance for nearby buildings or achieving a specific light intensity in accordance with EN-12464-2. Whatever it may be, we provide you with a complete solution that allows you to continue working on your project in the dark hours of the day, worry-free.

Let our experts advise or take direct contact with us.

Light pole without light pollution

The purpose of a (mobile) light tower is to illuminate projects so that work can be done safely. This often requires a large amount of light. In inner-city projects, this often results in nuisance lighting. Think of causes such as upward light, light against the façade and a bright light source that people look into. Thanks to increasingly stricter guidelines such as the NSVV's Light Nuisance Directive 2020, it is becoming increasingly difficult for companies to provide nuisance-free lighting.

In response to this development, we offer companies a completely new lighting concept. We do this with the Darklicht luminaire, a luminaire that uses Darklicht reflection technology to hide the light source deep inside the luminaire. As a result, the light is cut off hard and no light enters the air. With a slight tilt, the light can actually cover large distances. 

Industrial lighting pole

An industrial lighting mast has to put up with a lot. For instance, it is often exposed to the elements, cold, heat, moisture, vibrations and dust. These lighting columns can be expected to work constantly. Without light, work cannot be done safely and this can be extremely costly. Therefore, in addition to the light output, the reliability of the luminaires and the lighting column is at least as important. 

Reliability you can only expect from the DCbright brand. The brand built on reliability, offering unprecedented high light output for industrial luminaires. It is for this reason that it has been supplying lighting for the mining industry in Australia for 12 years, where the luminaires are used daily in the harshest conditions. Together with our expertise, we will help you apply these unique luminaires.

Reliable and efficient

Build on quality

Our products

Most solid work lamp in its class in extremely compact size. Often used on small light towers. EMC protected among many other electronic protections. Highest certifications such as IP69K and IK10. 

Voltage: 12 - 24V
Power: 55W - 70W
Luminous intensity: 8,275 lm to 12,412 lm

Extremely robust luminaire developed for the most demanding setting. Coated with 93% titanium. Available with radiant optics that illuminate for several kilometres. With the highest efficiency of its kind!

Voltage: 24V - 230V - 380V
Power: 120W - 320W
Luminous intensity: 36,755 lm to 66,202 lm

This industrial luminaire is unique and is installed flush. The luminaire shields light from its surroundings and does not dazzle. This lamp has by far the highest light output of any other on the market.

Voltage: 24V - 230V
Power output: 160W - 180W
Luminous intensity: 30,374lm to 31,525lm

The larger brother of the Barracuda, the Orca serves places where a lot of light is really needed. Lord and master in its class as the name suggests with the highest luminosity and robustness like no other.

Voltage: 24V - 230V - 380V
Power output: 800W
Luminous intensity: 215,160 lm

Most solid work lamp in its class in extremely compact size. Often used on small light towers. EMC protected among many other electronic protections. Highest certifications such as IP69K and IK10. 

Voltage: 12 - 24V
Power: 55W - 70W
Luminous intensity: 8,275 lm to 12,412 lm

Extremely robust luminaire developed for the most demanding setting. Coated with 93% titanium. Available with radiant optics that illuminate for several kilometres. With the highest efficiency of its kind!

Voltage: 24V - 230V - 380V
Power: 120W - 320W
Luminous intensity: 36,755 lm to 66,202 lm

This industrial luminaire is unique and is installed flush. The luminaire shields light from its surroundings and does not dazzle. This lamp has by far the highest light output of any other on the market.

Voltage: 24V - 230V - 380V
Power: 320W - 1800W
Luminous intensity: 87,040lm to 489,600lm

The larger brother of the Barracuda, the Orca serves places where a lot of light is really needed. Lord and master in its class as the name suggests with the highest luminosity and robustness like no other.

Voltage: 24V - 230V - 380V
Power output: 800W
Luminous intensity: 215,160 lm

Questions on application?

Get detailed advice from lighting design to full turnkey realisations.
If you are unsure which product is most suitable, we offer the possibility of testing our products.
Leave your details via the button below and we will contact you as soon as possible.

Put your questions directly to our experts

Jaap-de-Graaf-new

Jaap de Graaf

Managing Director

Lucas-de-Graaf-new

Lucas de Graaf

Technical director