...

Blog

How do you choose the right light colour for work in hot conditions?

For work in hot conditions, neutral white light (4000K) is the best choice in most cases. It offers sufficient brightness and contrast without overloading the environment with a cold, harsh light. In environments where glowing metal or fire is present, a warm white tone (3000K) can actually improve safety through better colour recognition of heat sources. The sections below go deeper into the factors that determine which light colour best suits your industrial work situation.

Which colour temperature is best for industrial workplaces?

For most industrial workplaces, neutral white light between 4000K and 4500K is the best choice. This colour temperature offers a good balance between brightness and contrast, supports alertness during long shifts and makes details clearly visible without tiring the eyes. It is the most widely used colour temperature for production halls, warehouses and outdoor sites.

The optimal colour temperature does depend on the specific task. Precise assembly work sometimes calls for slightly cooler light (5000K) for maximum sharpness. Outdoor locations or sites that operate 24/7 also benefit from cool to neutral white light because of the higher perceived brightness at equal lumen values.

Want to know more about how colour temperature and Kelvin values work exactly? On the page light color and Kelvin you will find a detailed explanation that helps you make the right choice for your situation.

  • 2700K to 3000K: warm white, suitable for situations with heat sources or specific safety considerations
  • 4000K to 4500K: neutral white, ideal for most industrial workplaces
  • 5000K to 6500K: cool white to daylight, suitable for precision work or outdoor lighting

How does extreme heat affect the colour rendering of LED lighting?

High ambient temperatures have a direct impact on the performance of LED lighting. When the temperature around the luminaire rises, the efficiency of the LED chip decreases. This phenomenon, also known as thermal droop , causes the light output to drop and the colour temperature to shift slightly. In extreme cases, this can lead to less accurate colour rendering.

Conventional LED luminaires are generally designed for ambient temperatures of up to 40 to 50 degrees Celsius at most. In steelworks, foundries or other environments with intense radiant heat, however, the temperature around a luminaire can rise to 80, 100 or even 120 degrees. Standard lighting then fails not only in terms of performance, but also in terms of lifetime.

Specially designed luminaires for high temperatures, such as those used in High-temperature lighting, use adapted thermal management systems and heat-resistant materials to keep colour rendering and light output stable even under extreme conditions.

What is the difference between colour temperature and colour rendering index (CRI)?

Colour temperature and the colour rendering index (CRI) are two different properties of light that are often confused. Color temperature indicates how warm or cool the light looks, expressed in Kelvin. CRI indicates how accurately colours are rendered under that light, on a scale from 0 to 100.

A lamp with a high colour temperature (cool, bluish light) can have a low CRI and therefore render colours in a distorted way. Conversely, a warm white lamp with a high CRI can show colours very accurately. For industrial applications both values are relevant, but for different reasons.

  1. Color temperature determines the atmosphere, alertness and perceived brightness of the workplace.
  2. CRI determines whether operators can distinguish colours correctly, which is crucial in quality control, recognising hazardous situations or reading colour-coded pipes and equipment.
  3. For most industrial applications, a CRI of at least 80 is considered acceptable. For precision work or safety-critical tasks, a CRI of 90 or higher recommended.

In hot environments, it is especially important to check whether a luminaire’s CRI remains stable at higher operating temperatures. Cheaper luminaires lose their colour accuracy faster as the temperature rises.

Which light colour is safer when working with glowing metal or fire?

When working with glowing metal, flames or other heat sources, warm white light (3000K) in many cases offers better safety than cool or neutral white light. The reason is that warm white light contrasts less with the orange and red glow of hot metal, so operators can better judge the temperature stages of the material.

Cool, bluish light (5000K or higher) can actually make it harder to perceive glowing materials. The strong contrast between the cool light and the warm glow of the metal makes it more difficult to assess the exact condition of the material. This is not a theoretical risk: in practice, operators in steelworks and foundries report that the choice of light colour directly affects their ability to work and their sense of safety.

It is also important that the lighting in such environments can withstand infrared radiation. Ordinary luminaires can be damaged by the intense radiant heat of glowing steel, even if the air temperature itself seems manageable.

When do you choose warm white light in a hot industrial environment?

Warm white light is the right choice when the nature of the work calls for softer contrast and a better match with the heat spectrum of the environment. This applies in particular to environments where glowing material, open fire or intense radiant heat is present.

Choose warm white light (2700K to 3000K) in these situations:

  • Workplaces in steelworks or foundries where operators have to judge the glowing phase of metal
  • Environments with open flames or high radiant heat where cool light disturbs vision
  • Situations where employees work for long periods and visual fatigue is a risk
  • Locations where the ambient lighting is already predominantly warm in tone and consistency in colour temperature is desired

In all other industrial situations, such as outdoor sites, warehouses, production halls without heat sources or cranes, neutral white light is the most practical and safe choice. So the choice is not a matter of preference, but of matching the light colour to the specific task and ambient conditions.

Practical example: Tata Steel IJmuiden

Tata Steel IJmuiden wanted to make the lighting near the production process more sustainable, and the survey showed that it could also be improved in a number of places. Close to the hot steel, the temperature rises to +120 °C, the steel emits infrared radiation and the composition of the air is aggressive. JEL Products took care of the lighting design, the engineering and the design of the installation, and supplied Snapper HT, Barracuda HT or Orca HT depending on the location. Near the work area, 100 lux is achieved, with a uniformity of up to 0.55.

This is about orientation and work around the process, not fine visual tasks. When choosing the light colour, what matters most is that employees can clearly see contrasts and obstacles next to a process that itself emits light and heat. That choice only holds if the luminaire itself does not deteriorate through heat and radiant heat. The HT versions reflect the infrared radiation instead of absorbing it, so that the LED and driver stay within their temperature window and the lighting remains as designed.

Read more about the Tata Steel IJmuiden project

How JEL Products helps with light colour in hot conditions

JEL Products advises on and supplies lighting solutions for the toughest industrial environments, including situations with extreme heat, radiant heat and continuous operations. The approach is always geared to the specific work situation, not to a standard solution.

Specifically, JEL Products provides support in the following areas:

  • Advice on the right colour temperature and CRI for your specific task and environment
  • Lighting design tailored to high temperatures, infrared radiation and other extreme environmental factors
  • Supply of luminaires that withstand temperatures up to +120 degrees Celsius
  • Guidance throughout the entire process: from engineering and design to installation and commissioning
  • Maintenance and aftercare for installations in hard-to-reach or hazardous environments

Whether you work in a steelworks, a foundry or another environment with extreme heat: choosing the right light colour starts with a good conversation about the work situation. Feel free to contact JEL Products for a no-obligation consultation.

Related Articles