Yes, high ambient temperature affects the energy consumption of lamps. With traditional light sources such as halogen lamps, consumption increases as the environment gets warmer. With LED lighting it is different: the consumption itself hardly changes, but the efficiency does drop, so you get less light per watt.
That distinction is crucial for anyone choosing lighting for industrial environments with extreme heat. Because in practice, lower efficiency means more luminaires, higher maintenance costs and a shorter lifetime. In this article we answer the most frequently asked questions about the relationship between temperature, energy consumption and lighting performance.
What happens to a lamp at high ambient temperature?
A lamp operating in a warm environment has to work harder to get rid of heat. With conventional light sources, this leads directly to higher energy consumption and faster wear. With LED lighting, the mechanism is more subtle: the light output drops, while the power consumption remains largely the same.
The core of the problem lies in heat dissipation. Every light source produces heat as a by-product. The higher the ambient temperature, the harder it is to get rid of that heat. When heat builds up in the luminaire, the temperature of the light source itself rises, and that has a direct effect on how the lamp performs.
With incandescent and halogen lamps, higher ambient temperatures age the filament faster. With fluorescent lamps, light output already drops noticeably at temperatures above 35 degrees Celsius. LEDs respond differently, but they are certainly not immune to heat, as the following sections explain.
How does temperature affect the efficiency of LED lighting?
LED lighting loses efficiency as the temperature of the LED chip rises. This phenomenon is called thermal lumen depreciation: the amount of light an LED produces per watt drops at higher temperatures. With a chip running 20 degrees warmer than designed, the light output can already be five to fifteen percent lower.
The critical measure is the so-called junction temperature: the temperature inside the LED chip itself. LED makers state in their datasheets at which junction temperature their LEDs perform optimally. When the ambient temperature rises, the junction temperature rises too, unless the luminaire has a good thermal management system.
A high-quality heat sink, a well-thought-out housing design and sometimes active cooling ensure that heat is dissipated quickly. Cheaper LED luminaires lack that thermal buffer, so they soon underperform in warm industrial environments. Choosing a luminaire designed for high ambient temperatures is therefore not a luxury, but a technical necessity.
Does a lamp use more electricity at higher temperatures?
The power consumption of an LED luminaire hardly changes at higher ambient temperatures. An LED driver sends a constant current to the chip, regardless of the ambient temperature. What does change is what you get back for that current: less light, less efficiency and, with poor thermal management, a greater chance of premature failure.
With traditional light sources this is different. Incandescent and halogen lamps can draw slightly more current at higher ambient temperatures, because the resistance of the filament changes with temperature. Fluorescent lamps have a different problem: they perform best within a specific temperature range and use relatively more energy when operating outside it.
For industrial applications the practical conclusion is clear: if you work in a warm environment with LED lighting that is not designed for those conditions, you pay the same for electricity but get less lighting performance. That is in effect a hidden efficiency loss that only becomes visible when you compare the light measurement with the specifications on paper.
What are the consequences of overheating for the lifetime of a lamp?
Overheating is the biggest enemy of LED lifetime. Every ten degrees Celsius by which the junction temperature rises above the design value can roughly halve the expected lifetime of the LED. A luminaire rated for 100,000 burning hours on paper can drop to 30,000 or even less in an overheated environment.
The consequences are concrete and costly:
- Faster lumen depreciation: the light gradually gets weaker, sometimes unnoticed until lighting levels are problematically low
- Colour shift: the light colour can shift, which affects visibility and safety in work environments
- Premature failure: components such as the LED driver and the chip itself age faster at sustained high temperatures
- Higher maintenance frequency: more frequent replacement means higher costs and more downtime, especially at hard-to-reach locations
- Increased risk of faults: in 24/7 operations, a sudden failure can have direct consequences for safety and production
For environments such as steelworks, foundries or drying rooms, this is not a theoretical risk. It is a daily reality that maintenance managers must take into account when specifying lighting.
Which lighting is suitable for environments with extreme heat?
Lighting for extremely hot environments must meet a number of specific requirements that standard luminaires do not. The key factors are a high maximum ambient temperature (Ta), robust thermal management and housing materials that withstand prolonged exposure to heat and possibly infrared radiation.
When selecting suitable lighting for high temperatures, pay attention to the following:
- Maximum ambient temperature (Ta value): always check what the manufacturer states as the maximum Ta. Standard LED luminaires often reach 40 to 50 degrees Celsius at most. For industrial applications you need luminaires that work at 80, 100 or even 120 degrees Celsius.
- Thermal management look at the construction of the heat sink. Solid aluminium with large cooling fins dissipates heat more efficiently than compact plastic housings.
- Protection against infrared radiation: in steelworks and foundries, not only the air temperature is a problem, but also the radiant heat from glowing material. Luminaires must be protected against this.
- IP protection class high temperatures often go hand in hand with dust, vapour or splashing water. A high IP rating ensures the luminaire remains reliable even in those combined conditions.
- Material selection: for environments with both heat and corrosion, stainless steel housings or special coatings are essential.
More about the technical requirements for High-temperature lighting can be found on the page that deals specifically with these applications.
How do you calculate the actual energy consumption of lighting in a warm environment?
The actual energy consumption of a luminaire in a warm environment differs from what is stated on the datasheet, because the efficiency drops. To get a realistic picture, you need to take into account the so-called thermal derating: the corrected light output at the actual ambient temperature.
A practical approach works as follows. Suppose a luminaire delivers 10,000 lumens at 25 degrees Celsius and the datasheet states that at 80 degrees Celsius the light output drops to 80 percent. Then at that high temperature you only have 8,000 lumens available. To achieve the desired lighting level, you therefore need more luminaires than the calculation on paper suggests.
For an accurate calculation, combine three pieces of data:
- The actual ambient temperature at the installation location
- The luminaire’s thermal derating curve (often available in the technical datasheet)
- The desired lighting level in lux, matched to the activities in that space
Without this correction, you run the risk that an installation complies on paper but delivers too little light in practice. That has direct consequences for safety and productivity. A thorough Custom lighting advice prevents this kind of unexpected shortfall.
Practical example: Tata Steel IJmuiden
Tata Steel IJmuiden wanted to become more sustainable, and that also applied to the lighting near the production process. Close to the hot steel, the temperature rises to +120 °C, infrared radiation is released and the air composition is aggressive. JEL took care of the lighting design and engineering and supplied Snapper HT, Barracuda HT and Orca HT, chosen per location based on what the situation required. The survey showed that the lighting could also be improved in a number of places; extra light was installed there. Near the work area, 100 lux is achieved, with a uniformity of up to 0.55.
For energy consumption, what matters most is that those values hold up. A luminaire whose light output declines due to heat and radiation still draws power but delivers less light, so consumption per useful lux rises. The HT versions reflect the infrared radiation instead of absorbing it, so that the LED and driver stay within their temperature window. That is the precondition for achieving the efficiency from the specifications in practice too.
Becoming more sustainable also does not have to mean less light. With a design per location, a more economical installation can actually provide more light where it is needed.
Read more about the Tata Steel IJmuiden project
How JEL Products helps with lighting at high ambient temperatures
JEL Products supplies LED luminaires designed specifically for environments where standard lighting falls short. That starts with the product choice, but goes much further. The approach aims to fully relieve technical decision-makers and maintenance managers in heavy industrial sectors.
Specifically, JEL Products offers the following:
- LED luminaires with proven operation up to 120 degrees Celsius ambient temperature, such as the Orca and Barracuda high-temperature floodlights
- Thermal derating calculations integrated into the lighting design, so that the desired lux level is achieved even at extreme temperatures
- Complete lighting design based on the actual ambient conditions, including infrared radiation and combined loads
- Support from engineering to installation and commissioning, including at hard-to-reach locations
- A maintenance strategy that takes into account the operational constraints of 24/7 environments
- ISO 9001 and VCA** certified working methods for quality assurance at every level of the project
Would you like to know which lighting solution suits your specific environment and temperature conditions? Get in touch and discuss the situation with a specialist who understands the technical and operational context.