High-temperature lighting has a direct positive impact on the CO2 emissions of factories. Because modern LED fixtures are specifically designed to perform stably in extreme heat, they consume significantly less energy than conventional alternatives that degrade quickly or require extra power under high temperatures. In this article, we answer the most frequently asked questions about energy consumption, thermal management, and sustainability in industrial environments.
How much energy does lighting in an industrial factory consume?
Lighting is responsible for a substantial portion of the total electricity consumption in most industrial factories. Depending on the sector, the type of production process and the size of the installation, that share can range from 15 to sometimes as high as 40 percent of the energy consumption. In environments that operate 24/7, such as steel mills or paper production lines, that effect is even greater.
What this actually means for a factory's CO2 emissions depends strongly on the type of luminaires in use. Traditional halogen lamps, high-pressure sodium lamps, and mercury vapor lamps are energy suckers compared to modern ones. LED lighting for heavy industry. Moreover, conventional light sources lose a lot of energy as heat, which brings additional disadvantages in environments with already high ambient temperatures.
For a factory with hundreds of luminaires that are constantly on, the energy consumption of the lighting system can reach tens of thousands of kilowatt-hours per year. The direct link between that consumption and CO2 emissions makes lighting a logical starting point for sustainability.
Why do conventional luminaires consume more energy at high temperatures?
High ambient temperatures directly affect the efficiency of conventional light sources. With high-pressure sodium lamps and mercury vapor lamps, energy consumption increases as the ambient temperature rises, while light output actually decreases. The result is that installers overdimension the installation to ensure sufficient illumination, which further increases energy consumption.
In addition, conventional fixtures age more quickly in hot environments. Reflector coatings become brittle, sealants become brittle, and the light source itself loses lumens more quickly. To maintain the lighting level, fixtures are replaced more frequently or higher wattages are used. Both options increase energy costs and the associated CO2 emissions.
In environments such as steel factories, where fixtures are exposed to infrared radiation and temperatures that can reach more than 100 degrees Celsius, this problem is particularly pronounced. Conventional lighting is simply not built for those conditions and performs worse accordingly.
How much CO2 do you save by switching to high-temperature LED lighting?
The CO2 savings from switching to high-temperature LED lighting are significant and are determined by three factors: the difference in energy consumption, the number of burn hours per year, and the CO2 emission factor of the electricity used. In practice, industrial companies save between 50 and 80 percent on the energy consumption of their lighting system after a complete LED renovation.
That translates directly into less CO2 emissions. Suppose a factory consumes 200,000 kWh of lighting annually. With an average emission factor for Dutch electricity of approximately 0.4 kg CO2 per kWh, that amounts to 80 tons of CO2 per year. A savings of 60 percent by switching to LED technology would be equivalent to: high temperature LED lighting This results in a reduction of almost 50 tons of CO2 per year.
What makes the savings particularly valuable in high-temperature environments is that LED fixtures maintain their efficiency even in extreme heat. That is a crucial difference compared to conventional lighting, where the energy savings on paper in practice turn out to be much smaller due to performance losses caused by heat.
What role does thermal management play in the sustainability of LED fixtures?
Thermal management is the key to a long lifespan and stable performance of LED fixtures in high-temperature environments. LEDs produce heat at the chip, and if that heat is not effectively dissipated, the junction temperature rises. This accelerates the degradation of the LED and reduces the light output. In an already hot environment, this risk is many times greater than in a standard indoor space.
Well-designed fixtures for extreme environments use advanced heat sinks, special thermal connections between the LED module and the fixture housing, and materials that effectively conduct and dissipate heat. The result is a stable operating temperature for the LED, even when the ambient temperature exceeds 60 or even 80 degrees Celsius.
The sustainability gain lies not only in energy savings, but also in the lifespan. A luminaire with good thermal management lasts significantly longer, which means that fewer luminaires need to be produced, transported, and processed. This reduction in material consumption and waste contributes indirectly to a lower carbon footprint over the entire lifecycle of the installation.
Does high-temperature LED lighting count towards sustainability goals?
Yes, the transition to energy-efficient LED lighting counts towards virtually all common sustainability goals that industrial companies adopt. Whether it involves CO2 reduction targets within the framework of an internal climate strategy, reporting under ESG reporting or participation in sectoral sustainability programs: lighting renovations are measurable, demonstrable steps.
The energy savings are directly quantifiable through energy meters and invoices, making it easy to calculate and report on the CO2 reduction. This makes lighting an attractive project for companies that want to show concrete progress towards their sustainability goals.
Furthermore, financial instruments are available in the Netherlands that make investing in energy-efficient lighting more attractive, such as the Energy Investment Deduction (EIA). This reduces the payback period and makes the business case even stronger. Companies that want to know which schemes apply can have that determined as part of a broader lighting project.
Practical example: Tata Steel IJmuiden
For Tata Steel IJmuiden, sustainability was the reason for addressing the lighting near the production process. The existing installation could be made more efficient, and during the inventory, it was found that the lighting could also be improved in some places. Instead of replacing one light fixture at a time, additional light was installed at each location. JEL supplied Snapper HT, Barracuda HT and Orca HT for an environment with temperatures up to +120 °C, infrared radiation and aggressive air. 100 lux is achieved near the work environment, with uniformity of up to 0.55.
For the CO2 balance, more than the power rating on the type plate counts. A energy-efficient fixture that quickly degrades or fails in heat must be replaced more often, and each replacement involves production, transportation, and assembly. An installation that maintains performance under real-world conditions keeps both energy consumption and those indirect emissions low.
Conserving resources does not necessarily mean less light. By designing for each location, savings can be combined with a better working environment, as seen here in places where additional light has been installed.
Read more about the Tata Steel IJmuiden project
How JEL Products helps with high-temperature lighting and CO2 reduction
JEL Products develops and delivers LED lighting solutions that are specifically designed for the toughest industrial environments, including environments with extreme heat, infrared radiation, and 24/7 operations. The approach is always tailored to the customer’s specific situation, not a standard off-the-shelf solution.
Specifically, JEL Products offers:
- Valves with proven thermal management for environments up to +120°C
- Customized lighting design tailored to the organization’s energy goals
- Calculation of the expected CO2 reduction and energy savings in advance
- Assistance with subsidy processes and tax arrangements such as the EIA
- Complete unburdening from engineering to installation and commissioning
- Maintenance programs that maximize the lifespan of the installation
Whether it’s a steel factory, a production hall or an industrial site with extreme conditions: JEL Products can help you from the initial lighting advice to the final fixture. Want to know what the impact of a lighting renovation is on your factory’s CO2 emissions? Get in touch and discuss the possibilities.
Related Articles
- What is the difference between standard and high-temperature industrial lighting?
- What are the dangers of improper lighting during extreme heat?
- How do you recognize when the terminal lighting no longer suits the operation?
- How do you efficiently light a cross-docking facility or logistics center?
- What are the requirements for lighting in a harbor?