...

Blog

What is the role of lighting in quality control in hot production environments?

In quality control in hot production environments, good lighting is not a side issue but a direct precondition for reliable inspection. Anyone working in a steelworks, foundry or other environment with extreme heat needs lighting that is not only bright, but also holds up under heavy thermal load. In this article we answer the most frequently asked questions about lighting, quality control and high temperatures.

What lighting requirements apply to quality control in hot production environments?

For quality control in hot production environments, lighting must provide sufficient illuminance at the inspection point, have good colour rendering and withstand the thermal conditions on site. Without these three elements, reliable visual inspection is simply not possible, however well the rest of the process is organised.

In practice, this means that the illuminance at working level must be high enough to make small deviations, irregularities or defects visible. Think of surface defects in metal products, weld seams or dimensional deviations. Not only the number of lux matters, but also the uniformity of the light. Dark spots or harsh shadows make a quality inspector’s work considerably harder.

Colour rendering plays an equally important role. A high colour rendering index (Ra or CRI) ensures that materials, coatings and surface textures look the same under artificial light as in daylight. In environments where colour differences signal deviations, this is crucial.

Finally, the luminaire itself must withstand the environment. High ambient temperatures, dust particles, radiant heat from furnaces or melting furnaces and mechanical vibration place heavy demands on the housing, the optics and the electronics of the lighting.

How does high temperature affect the performance of industrial lighting?

High ambient temperatures directly affect the performance of industrial lighting. LED components are sensitive to heat: as the temperature around the light source rises, the light output drops and the degradation of the light source accelerates. This phenomenon is called thermal lumen depreciation and causes luminaires to age faster than under normal conditions.

Heat also affects the electronics in the driver of an LED luminaire. Drivers that are not designed for high ambient temperatures can fail or operate unstably, leading to flickering or sudden failure. In a production environment where quality control takes place continuously, this is unacceptable.

Another point of attention is infrared radiation. In steelworks and foundries, not only does the air temperature get high, the environment also radiates intense heat in the form of infrared. Standard luminaires are not designed for this and can fail sooner under this radiant load than the air temperature alone would suggest.

Luminaires developed specifically for High-temperature lighting use thermally optimised housings, heat-resistant materials and drivers matched to the actual ambient conditions, including radiant heat.

What types of lighting are suitable for environments with extreme heat?

In environments with extreme heat, LED luminaires with high temperature resistance are the most suitable choice for quality control and general work lighting. Traditional light sources such as halogen lamps or high-pressure sodium lamps are heat-resistant in their light source, but produce a lot of heat themselves and are energy-inefficient. Modern high-temperature LED luminaires combine high light output with low heat generation and a long lifetime, even under heavy thermal load.

When choosing suitable lighting for hot production environments, the following characteristics are decisive:

  • Temperature resistance luminaires must operate reliably at ambient temperatures of at least +60°C, and in extreme cases up to +120°C or higher.
  • Protection against dust and moisture: a high IP rating ensures that dust particles and splashing water do not damage the luminaire.
  • Resistant to infrared radiation: specially designed housings and reflectors protect the internal components against radiant heat.
  • Good colour rendering: a CRI of at least 80, preferably higher, for reliable visual inspection.
  • Shock resistance in environments with vibration and mechanical load, a high IK rating is essential.

For the most demanding applications, such as near blast furnaces or melting furnaces, specialised high-temperature floodlights have been developed that are designed specifically to work under intensive radiant heat. The Heavy industry with extreme heat calls for luminaires that go beyond standard industrial specifications.

What are the consequences of poor lighting for quality control in industry?

Poor lighting leads directly to missed defects, higher reject rates and increased safety risks. A quality inspector working under insufficient or uneven light misses subtle deviations that would be immediately visible under better conditions. This has consequences that reach beyond the inspection process itself.

In production environments where material defects are only discovered later in the chain, the cost of rework or rejection is considerably higher than when they are caught at the source. Poor lighting increases the chance that defects go unnoticed and flow through to subsequent production stages or even to the end customer.

Besides the impact on quality, there is also a safety aspect. In hot production environments, people often work close to hazardous installations, molten materials or moving machinery. Insufficient illuminance or disturbing glare increases the risk of accidents. In this context, lighting is not only a production tool, but also a safety measure.

Finally, poor lighting affects the employees themselves. Working in poor lighting conditions tires the eyes faster, reduces concentration and increases susceptibility to errors, especially during long inspection tasks. Good lighting expertise also takes into account the visual comfort of the people who work under it every day.

How do you choose the right lighting for a hot production hall?

You choose the right lighting for a hot production hall based on a combination of environmental factors, usage requirements and the technical specifications of the luminaires. There is no universal answer, but a structured approach helps you make the right choice.

Go through the following steps during the selection process:

  1. Map the ambient conditions: what is the maximum ambient temperature, and is there radiant heat, dust, moisture or vibration?
  2. Determine the lighting requirements per zone: what illuminance and colour rendering are needed for the specific tasks carried out at each location?
  3. Select luminaires based on technical specifications: look at the maximum ambient temperature (Ta), IP and IK rating, CRI value and the lifetime warranty at elevated temperatures.
  4. Consider ease of maintenance: in hot environments, luminaires are often hard to reach. Choose solutions with a long lifetime and minimal maintenance requirements.
  5. Perform a lighting calculation. a professional simulation of the light distribution prevents dark zones or glare problems from arising after installation.

Good preparation prevents costly adjustments afterwards and ensures that the lighting contributes to reliable quality control and a safe working environment from day one.

Practical example: Farm Frites

At Farm Frites, previously installed LED lighting failed repeatedly in the drying tunnels and production ovens, due to high thermal stress and an intensive cleaning routine. Lifetime was the client’s top priority, because a failure in a production line mainly means standstill. JEL designed a special power supply version of the stainless steel Snapper HT: the Snapper HT-SS with borosilicate glass, IP69K and a HACCP-compliant design. 78 luminaires of 35 W were supplied. In the oven, 200 to 500 lux is achieved, with a uniformity of 0.65 to 0.85 across the different zones.

For quality control, those last values say the most. A high illuminance with high uniformity means that what happens in the oven is visible everywhere under comparable light, without dark spots where deviations go unnoticed.

It also matters that the light stays. A luminaire that dims or fails after a few cleaning cycles makes every visual check at that spot unreliable, however good the original lighting design was. Resistance to heat and cleaning is therefore also a prerequisite for reliable inspection in such an environment.

Read more about the Farm Frites project

How JEL Products helps with lighting for quality control in hot environments

JEL Products develops and supplies lighting solutions designed specifically for the toughest industrial conditions, including production environments with extreme heat. The approach goes beyond supplying a luminaire: it starts with a thorough analysis of the ambient conditions and ends with a working installation that meets the requirements for safety, visibility and continuity.

Specifically, JEL Products offers:

  • Specialised high-temperature LED luminaires, such as the Orca and Barracuda, with temperature resistance up to +120°C and protection against infrared radiation.
  • Professional lighting design based on the specific layout, tasks and ambient conditions of the production hall.
  • Guidance in selecting luminaires based on IP rating, IK rating, CRI value and thermal specifications.
  • Full project support from engineering to installation and commissioning.
  • Support with maintenance planning for installations in hard-to-reach locations.

Would you like to know which lighting solution suits your production environment? Get in touch and discuss the possibilities with a specialist.

Related Articles