Home / Products / Goby

Goby LED work light

The classic professional work light: 35 to 65 W and up to 8,200 lumens, versatile for use on machinery, vehicles, and equipment.

Four DC power supplies on a single platform, with the Deutsch connector integrated into the housing and no separate driver. Positioned between the compact Goby Mini and the heavier Piranha, this is the workhorse for everyday professional use, also available in a high-temperature version rated up to +120 °C.

Response within 1 business day by an engineer. Free lighting calculation and trial luminaire possible.

Goby 9 in Titanium Black, with the standard 316L bracket.

Luminous flux

8,200 lm

Ultra, 65 W and 126 lm/W

Protection

IP69K

also IP66, IP67, and IP68

Impact Resistance

IK10

with polycarbonate, IK09 with glass

Trilling

6 G

at resonance, IEC 60068-2-6

Warranty

5 years

on the entire luminaire

Weight

1.8 kg

including 316L bracket

Versions Specifications Optics Mounting Downloads FAQ

Decision Aid

When should you choose the Goby?

The workhorse between the compact Goby Mini and the heavier Piranha: a classic, powerful, and versatile work light for everyday professional use.

A classic professional work light is desired for machines, vehicles and service points
The environment requires IP69K and IK10
The 12- or 24-volt on-board power system must be connected directly: Deutsch connector in the housing, no cable or junction box
Multiple optics are required to tune the light distribution to the application
Output, format, and robustness must be in balance: four power levels in a single enclosure
The operating temperature ranges up to +120 °C: the Goby HT

When another luminaire fits better

The Goby is not intended for every task. Being clear about its limitations leads to a better end result.

Maximum mechanical robustness has priority: then the Piranha
The mounting position is very compact: then the Goby Mini
A larger area calls for a floodlight: then the Marlin or the Snapper
Dazzling of the driver or environment must be actively limited: then the DarkLicht Mini of DarkLicht S
ATEX or Ex certification is required
A work light made entirely of 316L stainless steel is required: then the Piranha 316L

Versions

One platform, three lines

The same die-cast housing measuring 120 × 141 × 79 mm; what differs is the power rating and specialization. Four DC power ratings, a high-temperature line, and the compact Mini as the little brother.

Goby Mini

2,300 lm at 18 W

The compact brother of 112 × 70 × 60 mm, 90.5 mm high over the bracket, and 1.1 kg, for smaller mounting positions. An in-house product with its own page.

See the Goby Mini page

GODC01

Goby HT

2,600 lm at 13 W

The same housing, rated for +120 °C: chemically tempered glass, 120° beam angle, and, for AC, a remote driver located outside the hot zone.

Goby DC Line

4,600 – 8,200 lm

Four power options in the same housing: 35, 55 (in two lighting packages), and 65 W. Deutsch connector in the housing, drivers on the circuit board, operates directly on 9–32 VDC.

GODC03 · GODC05 · GODC06 · GODC07

Product family

The Goby's place within the work lamp family

Five work lights, with increasing output. The right choice depends on the machine's requirements: size, durability, or glare-free work lighting.

Luminaire	Role in the range	Power	IP and IK	Weight
Goby Mini 2,300 lumens	The most compact work light, for smaller installation locations.	18W	IP69K / IK10	1.1 kg
DarkLicht Mini 4,800 lumens	Compact, glare-free work light with full cut-off.	30 W	IP69K / IK08	2.2 lbs
Goby 8,200 lumens	The classic professional work light, versatile in four power levels.	35 to 65 W	IP69K / IK10	1.8 kg
Piranha 8,400 lumens	The most robustly built work light, also available in 316L and AC.	55 to 70 W	IP69K / IK10	3.1 kg
DarkLicht S 12,825 lumens	The largest non-glare work light, with the output of a small floodlight.	60 to 75 W	IP69K / IK08	3.3 kg

Specifications

Full specification

The Goby is available in four DC power ratings and as an HT version. Select a version, and the complete list of specifications below will update accordingly, including the part number, power consumption, and connections.

Item number

GODC03-50K · also 40K, 27K and 22K

The line input power: 35 W for cabins, service points, and positions close to the work.

4,600 lm

Light

Luminous flux	4,600 lm
Power consumption	35 W
Efficiency	131 lm/W
Optics	14° spot, 38°, 69°, 14° × 46° flare; combinations possible
Color temperatures	6500K, 5000K, 4000K, 2700K and amber 2200K
Bi-color	4000K with amber 2200K, switchable during operation
CRI (Ra)	> 70, or optionally 80 or 90
Color consistency	3-step MacAdam

Electric

Voltage range	9–32 VDC
Nominal voltage	24 V / 12 V
Current draw	approx. 1.5 A at 24 V · 2.9 A at 12 V
Dimming	custom work
Driver	DC driver circuit board
Driver Type	not applicable, driver on board
Inrush current	not applicable, driver on board
Luminaires per MCB	not applicable, driver on board
Surge protection	not applicable, driver on board
Labor Factor and THD	not applicable, driver on board

Construction

Housing	cast aluminum, < 0.08 % copper
Surface treatment	conversion layer with 2-layer titanium e-coating
Bracket	high tensile strength 316L stainless steel, unlimited from −60° to +30°
Front	UV-resistant polycarbonate IK10 or chemically toughened glass IK09
Color	Titanium Black
Dimensions	120 × 141 × 79 mm
Weight	1.8 kg, including bracket
Lead time	Standard within a week, custom by arrangement
Cable type	no cable: connector in the housing
Connection	Deutsch DTP04, 2-pin, in the housing
Accessories	Crane Light Director

Protection and durability

IP Ratings	IP66, IP67, IP68 and IP69K
Impact Resistance	IK10 with polycarbonate, IK09 with glass
Corrosion class	C5 Industrial and Maritime (ISO 9223)
Vibration class	6 G at resonance (IEC 60068-2-6), shock IEC 60068-2-27
Operating temperature	−45 to +50 °C
LED lifespan	TM-21 L90B05 > 360,000 hours
Driver lifespan	not applicable
MTBF driver	not applicable, driver on board
Warranty	5 years on the complete luminaire
Certification	CE, IEC 60598, EN 55015, EN 61547, EMC. North America upon request.
Packaging	depending on quantity, upon request

Item number

GODC05-50K · also 40K, 27K and 22K

The mid-range models at 12 and 24 V: 55 W and 6,300 lumens,the most commonly installed Goby.

6,300 lm

Light

Luminous flux	6,300 lm
Power consumption	55 W
Efficiency	115 lm/W
Optics	14° spot, 38°, 69°, 14° × 46° flare; combinations possible
Color temperatures	6500K, 5000K, 4000K, 2700K and amber 2200K
Bi-color	4000K with amber 2200K, switchable during operation
CRI (Ra)	> 70, or optionally 80 or 90
Color consistency	3-step MacAdam

Electric

Voltage range	9–32 VDC
Nominal voltage	24 V / 12 V
Current draw	approx. 2.3 A at 24 V · 4.6 A at 12 V
Dimming	custom work
Driver	DC driver circuit board
Driver Type	not applicable, driver on board
Inrush current	not applicable, driver on board
Luminaires per MCB	not applicable, driver on board
Surge protection	not applicable, driver on board
Labor Factor and THD	not applicable, driver on board

Construction

Housing	cast aluminum, < 0.08 % copper
Surface treatment	conversion layer with 2-layer titanium e-coating
Bracket	high tensile strength 316L stainless steel, unlimited from −60° to +30°
Front	UV-resistant polycarbonate IK10 or chemically toughened glass IK09
Color	Titanium Black
Dimensions	120 × 141 × 79 mm
Weight	1.8 kg, including bracket
Cable type	no cable: connector in the housing
Connection	Deutsch DTP04, 2-pin, in the housing
Accessories	Crane Light Director

Protection and durability

IP Ratings	IP66, IP67, IP68 and IP69K
Impact Resistance	IK10 with polycarbonate, IK09 with glass
Corrosion class	C5 Industrial and Maritime (ISO 9223)
Vibration class	6 G at resonance (IEC 60068-2-6), shock IEC 60068-2-27
Operating temperature	−45 to +50 °C
LED lifespan	TM-21 L90B05 > 360,000 hours
Driver lifespan	not applicable
MTBF driver	not applicable, driver on board
Warranty	5 years on the complete luminaire
Certification	CE, IEC 60598, EN 55015, EN 61547, EMC. North America upon request.
Packaging	depending on quantity, upon request

Item number

GODC06-65K · also 50K, 40K, 27K and 22K

The same output as the Goby 9, with a more efficient light package: 7,200 lumens from 55 W.

7,200 lm

Light

Luminous flux	7,200 lm
Power consumption	55 W
Efficiency	131 lm/W
Optics	14° spot, 38°, 69°, 14° × 46° flare; combinations possible
Color temperatures	6500K, 5000K, 4000K, 2700K and amber 2200K
Bi-color	4000K with amber 2200K, switchable during operation
CRI (Ra)	> 70, or optionally 80 or 90
Color consistency	3-step MacAdam

Electric

Voltage range	9–32 VDC
Nominal voltage	24 V
Current draw	approx. 2.3 A at 24 V · 4.6 A at 12 V
Dimming	custom work
Driver	DC driver circuit board
Driver Type	not applicable, driver on board
Inrush current	not applicable, driver on board
Luminaires per MCB	not applicable, driver on board
Surge protection	not applicable, driver on board
Labor Factor and THD	not applicable, driver on board

Construction

Housing	cast aluminum, < 0.08 % copper
Surface treatment	conversion layer with 2-layer titanium e-coating
Bracket	high tensile strength 316L stainless steel, unlimited from −60° to +30°
Front	UV-resistant polycarbonate IK10 or chemically toughened glass IK09
Color	Titanium Black
Dimensions	120 × 141 × 79 mm
Weight	1.8 kg, including bracket
Cable type	no cable: connector in the housing
Connection	Deutsch DTP04, 2-pin, in the housing
Accessories	Crane Light Director

Protection and durability

IP Ratings	IP66, IP67, IP68 and IP69K
Impact Resistance	IK10 with polycarbonate, IK09 with glass
Corrosion class	C5 Industrial and Maritime (ISO 9223)
Vibration class	6 G at resonance (IEC 60068-2-6), shock IEC 60068-2-27
Operating temperature	−45 to +50 °C
LED lifespan	TM-21 L90B05 > 360,000 hours
Driver lifespan	not applicable
MTBF driver	not applicable, driver on board
Warranty	5 years on the complete luminaire
Certification	CE, IEC 60598, EN 55015, EN 61547, EMC. North America upon request.
Packaging	depending on quantity, upon request

Item number

GODC07-65K · also 50K, 40K, 27K and 22K

The top-tier version: 8,200 lumens from 65 W, for the 24 V on-board electrical system.

8,200 lm

Light

Luminous flux	8,200 lm
Power consumption	65 W
Efficiency	126 lm/W
Optics	14° spot, 38°, 69°, 14° × 46° flare; combinations possible
Color temperatures	6500K, 5000K, 4000K, 2700K and amber 2200K
Bi-color	4000K with amber 2200K, switchable during operation
CRI (Ra)	> 70, or optionally 80 or 90
Color consistency	3-step MacAdam

Electric

Voltage range	20–32 VDC
Nominal voltage	24 V
Current draw	approx. 2.7 A at 24 V
Dimming	custom work
Driver	DC driver circuit board
Driver Type	not applicable, driver on board
Inrush current	not applicable, driver on board
Luminaires per MCB	not applicable, driver on board
Surge protection	not applicable, driver on board
Labor Factor and THD	not applicable, driver on board

Construction

Housing	cast aluminum, < 0.08 % copper
Surface treatment	conversion layer with 2-layer titanium e-coating
Bracket	high tensile strength 316L stainless steel, unlimited from −60° to +30°
Front	UV-resistant polycarbonate IK10 or chemically toughened glass IK09
Color	Titanium Black
Dimensions	120 × 141 × 79 mm
Weight	1.8 kg, including bracket
Cable type	no cable: connector in the housing
Connection	Deutsch DTP04, 2-pin, in the housing
Accessories	Crane Light Director

Protection and durability

IP Ratings	IP66, IP67, IP68 and IP69K
Impact Resistance	IK10 with polycarbonate, IK09 with glass
Corrosion class	C5 Industrial and Maritime (ISO 9223)
Vibration class	6 G at resonance (IEC 60068-2-6), shock IEC 60068-2-27
Operating temperature	−45 to +50 °C
LED lifespan	TM-21 L90B05 > 360,000 hours
Driver lifespan	not applicable
MTBF driver	not applicable, driver on board
Warranty	5 years on the complete luminaire
Certification	CE, IEC 60598, EN 55015, EN 61547, EMC. North America upon request.
Packaging	depending on quantity, upon request

Item number

GOHT01-65K (AC) · GOHT02-65K (DC) · also 40K and 27K

For oven zones and motor compartments: up to +120 °C for AC, +110 °C for DC. Chemically strengthened glass standard.

2600 lm

Light

Luminous flux	2600 lm
Power consumption	13 W
Efficiency	200 lm/W
Optics	120° extra wide, lens optics not possible
Color temperatures	6500K, 4000K, and 2700K
Bi-color	not available as standard
CRI (Ra)	> 70, or optionally 80 or 90
Color consistency	3-step MacAdam

Electric

Voltage range	90–305 VAC or 9–32 VDC
Nominal voltage	24 V DC
Current draw	approx. 0.05 A at 230 V · 0.55 A at 24 V
Dimming	0–10 V, PWM, and DALI-2 (AC); DC custom-made
Driver	AC: remote BLD075, can in DRB-1 · DC: on PCB
Driver Type	BLD075, 75 W (AC)
Inrush current	66 A peak, T50 170 µs at 220 V
Luminaires per MCB	B16: 11 · C16: 19 · C25: 30 · D16: 32
Surge protection	6 kV line-to-line, 10 kV line-to-ground (IEC 61000-4-5)
Labor Factor and THD	> 0.9 at 65–100 % load, THD < 15 % at 60–100 %

Construction

Housing	cast aluminum, < 0.08 % copper
Surface treatment	conversion layer with 2-layer titanium e-coating
Bracket	high tensile strength 316L stainless steel, unlimited from −60° to +30°
Front	IK09 chemically tempered glass or borosilicate glass
Color	Titanium Light Gray
Dimensions	120 × 141 × 79 mm
Weight	1.8 kg, including bracket
Cable type	SiHF-OB, 15.0 m
Connection	pre-assembled cable, loose wires
Accessories	DRB-1 driver box

Protection and durability

IP Ratings	IP66, IP67, IP68 and IP69K
Impact Resistance	IK09
Corrosion class	C5 Industrial and Maritime (ISO 9223)
Vibration class	6 G at resonance (IEC 60068-2-6), shock IEC 60068-2-27
Operating temperature	-45 to +120 °C (AC), up to +110 °C (DC)
LED lifespan	TM-21 L90B05 > 360,000 h at 50 °C, 51,400 h at 120 °C
Driver lifespan	≥ 100,000 hours at Tc 75 °C, ≥ 130,000 hours at Tc 50 °C
MTBF driver	≥ 320,000 hours at Tc 75 °C (MIL-HDBK-217F)
Warranty	5 years to +120 °C
Certification	CE, IEC 60598, EN 55015, EN 61547, EMC. North America upon request.
Packaging	depending on quantity, upon request

All values above are also listed on the datasheet, including dimensions and order code.

For the installer

Driver, circuit loading and protection

The driver is separate from the luminaire and can be placed in the DRB-1 driver box. The values below are from the Upowertek datasheets and apply per driver, not per luminaire.

Driver AC

BLD075

75 W, remote, for the HT AC

Inrush current

66 A piek

T50 170 µs at 220 V

Overvoltage

6 / 10 kV

line-to-line / line-to-earth, IEC 61000-4-5

MTBF driver

320,000 h

at Tc 75 °C, MIL-HDBK-217F

Maximum number of drivers per miniature circuit breaker

Driver	B16	C16	C25	D16
BLD075 · HT AC 13 W	11	19	30	32

Calculated with ABB S200 at 220 V, from the manufacturer's MCB table. Guideline for the engineering phase and not a replacement for the installation calculation; for verification we provide a lighting advice and installation calculation. If there are multiple drivers in one luminaire, divide the number by that number of drivers.

Other electrical

Work factor > 0.9 for a 65 to 100 % load
THD < 15 % at a load of 60 to 100 %
Driver lifetime ≥ 100,000 h at Tc 75 °C, ≥ 130,000 h at Tc 50 °C
Dimming with 0–10 V, PWM and DALI-2, or via NFC
Leakage current max. 0.7 mA at 240 VAC, IEC 60598-1
DC versions in 9–32 V, drivers on the PCB

Optics

Optics and measured beam angles

The lens angle determines where the light ends up. Below are the measured angles from our own IES library, with the optic name as the ordering code next to it. An optic name is not a measured value: the 14° optic measures 13°. If you are in doubt between two angles, we will substantiate the choice with a free lighting calculation.

14° spot

Driving light for distance, 20 to 80 m

38° floodlight

The most chosen angle, 8 to 30 m

69° extra wide

Wide working range close up, up to 15 m

14° × 46° flare

Asymmetrical, along boom, roadway or quay

Optics	Beam angle 50 %	Veldhoek 10 %	Application distance
14° spot	13°	see diagram	20 to 80 m, measured on the DCB9 optics
38°	nominal 38°	see diagram	8 to 30 m, the standard choice
69°	69° nominal	see diagram	up to 15 m, wide close up
14° × 46° flare	asymmetric	see diagram	elongated zones, combinations possible

The beam angle is the full angle between the directions in which the intensity has decreased to 50 % of the peak; the field angle is 10 %. The upward light output is 0 % at 0° tilt. Combinations of optics within a single luminaire are possible.

Mounting

Video editing software

On machines and vehicles, the connection determines just as well as the bracket or a work light whether it will reach its lifespan. The Goby is therefore designed around the Deutsch connector: no cable, no junction box, no cable gland.

Deutsch DTP04 in the housing

The two-pole connector sits directly in the casting: connection is one click on the on-board network, without a cable, junction box, or cable gland as a source of failure.

316L bracket, −60° to +30°

High tensile strength stainless steel bracket, infinitely adjustable within the range. Even when the machine vibrates, the bundle remains in place.

Crane Light Director

Self-aligning suspension for crane use, which keeps the bundle aimed at the load while the boom moves.

DRB-1 driver box for the HT

The HT version features a remote BLD075 driver; the DRB-1 houses this unit outside the hot zone, with 15 meters of SiHF cable in between.

A fall protection cable is optionally available and is often a strict requirement when installed above a work area. The DRB-1 driver box houses the remote driver and is mounted directly behind the luminaire using the rear mount bracket. The Crane Light Stabilizer has its own product page. For tower cranes see also Tower crane lighting.

Dimensioning

All dimensions in millimeters. The mounting pattern and bracket cross-sections are in the datasheet; DXF and STEP files are available upon request.

Views with dimensions. Drawing not to scale.

Luminaire	120 × 141 × 79 mm
Weight	1.8 kg
Bracket adjustment	unlimited, −60° to +30°
Connection	Deutsch DTP04 in the housing, HT with 15.0 m SiHF cable
Color	Titanium Black, HT in Titanium Light Grey
Packaging	on request

The weight listed includes the bracket. Packaging dimensions and weight are included in the listing because JEL handles shipping.

Applications

Where the Goby is located in practice, and why there.

Earthmoving and machinery

On the cab, boom, and counterweight of excavators, wheel loaders, and haul trucks. The Deutsch connector connects directly to the on-board electrical system, without a junction box as a source of failure.

View mobile machines

Agricultural and off-road

On tractors, all-terrain vehicles, and off-road equipment, the 12-volt vehicle electrical system and vibration resistance matter. The Goby is the standard work lamp there.

Watch extreme off-road

Cranes and lifting equipment

As a task-relieving aid for the boom and crane bridge, close to the load and hook. With the Crane Light Director, the beam remains focused on the load.

View crane lighting

Vehicles and service points

On service vehicles, access areas, and workstations around the machine: reliable work lighting for daily professional use.

View our projects

High temperature

The Goby HT works up to +120 °C

Where standard work lights fall short thermally, the Goby HT continues to function: near furnaces, smelters, and engine compartments up to +120 °C ambient temperature. Chemically toughened glass and a 120° distribution are standard.

The AC version keeps the driver out of the hot zone: a 15-meter-long SiHF-OB cable bridges the distance to the remote BLD075, which can fit in the DRB-1 driver box. The DC version connects directly to 9–32 V and operates up to +110 °C.

Service life at +50 °C	> 360,000 hours
at +85 °C	103,000 hours
at +105 °C	71,700 hours
at +120 °C	51,400 hours

TM-21 L90B05. 5-year warranty up to +120 °C. See also High-temperature lighting.

Evidence

Tested, not promised

Every claim carries its condition in the same sentence. You can read more about the test methods at Product Quality and Warranty.

Salt Spray · ISO 9227

1,007 hours

Neutral salt spray test in accordance with ISO 9227, performed on a cast housing that had been scratched beforehand: no coating delamination after 1,007 hours.

Vibration · IEC 60068-2-6

6 G continuous

Vibration-resistant up to 6 G at resonance in accordance with IEC 60068-2-6, with shock testing in accordance with IEC 60068-2-27.

Practice

The European work light

Designed and further developed in Europe, on the machinery of European manufacturers: from agricultural equipment and service vehicles to cranes and earthmoving equipment.

Downloads

Data Sheet

Four pages with the full specification, dimensions and order code. Available for immediate download.

3D file

STEP or DXF for your own drawing work, including the mounting pattern of the bracket.

Photometric files

All 23 versions and optics of the Goby in EULUMDAT (.ldt) format, bundled together in a single 1.3 MB ZIP file. DIALux and Relux can read these files directly. The part number is included in the file name and within the file itself. We provide IES files upon request.

Manual

Installation, wiring, mounting, maintenance and fault finding for the Goby Series in one document of 34 pages, Rev. 1. Download directly in the language of this page.

Also in: Nederlands · English · Deutsch · Français · Español

FAQ

Frequently Asked Questions

Is your question not listed, or would you like something calculated? An engineer will respond within 1 business day.

What is the difference between the Goby, the Goby Mini, and the Piranha?

All three are classic work lights. The Goby Mini is the compact entry-level model with 2,300 lm and weighing 1.1 kg; the Goby is the versatile workhorse with up to 8,200 lm; the Piranha is the most robust variant, weighing 3.1 kg, also available in all-316L and AC versions. For glare-free work lighting, there is the DarkLicht line.

Which Goby model should I choose?

The Goby 9 (55 W) is the most commonly installed model: 6,300 lm at 12 and 24 V. If less is needed, go with the Goby 6 (35 W). If maximum output or efficiency is required, choose the Pro (7,200 lm from 55 W) or the Ultra (8,200 lm from 65 W, 24 V only). For high-temperature areas, there’s the HT.

Why a Deutsch connector in the housing?

The Deutsch DTP04 is the standard in vehicle and machine construction: waterproof, vibration-resistant, and can be mounted without a junction box or cable gland. Because the connector is integrated into the casting, there is no cable that can be damaged; connecting is just one click on the vehicle's electrical system.

Does the Goby operate on a 12-volt vehicle electrical system?

Yes. The Goby 6, 9, and Pro operate on 9 to 32 VDC and are therefore compatible with 12- and 24-volt systems; the Ultra requires 20 to 32 VDC and is therefore a 24-volt luminaire. The drivers are integrated onto the circuit board; no external driver is required.

Can the Goby be dimmed or integrated into a control system?

For the DC versions, dimming is custom work because the drivers on the printed circuit board deliver a constant current; group switching is possible via the on-board electrical system. The HT AC version dims via 0–10 V, PWM, and DALI-2.

Which lens angle should I choose?

The 38° is the standard choice for working surfaces at 8 to 30 meters. The 14° spot (measured 13°) bridges distance, the 69° illuminates broadly up close, and the 14° × 46° flare lays an asymmetrical path along boom, lane, or quay. Combinations within a single machine are common; we provide advice per mounting position.

Is the Goby resistant to high-pressure cleaning?

Yes. The luminaire has been tested to IP66, IP67, IP68, and IP69K. All of these classes are mentioned because they are different tests: IP69K is high-pressure and high-temperature steam jet, IP68 is immersion. One does not imply the other.

Is the Goby suitable for continuous vibration?

Yes. The vibration class is 6 G at resonance, tested in accordance with IEC 60068-2-6, with shock testing in accordance with IEC 60068-2-27. The housing is a single casting without assembled parts, and the 316L bracket clamps without limitation within −60° to +30°.

Can the Goby be used in corrosive environments?

Yes. The housing contains less than 0.08 % of copper and has a 2-layer titanium-based e-coating; the bracket is made of 316L. This meets corrosion class C5 Industrial and Maritime standards. The Goby is not available as a fully 316L work light; if that requirement is mandatory, please consider the Piranha 316L.

Discuss your Goby application

Tell us about the application, the location, and the scope of the project. We'll help you choose the design, the finish, and the mounting hardware.

Lucas de Graaf

Technical Director, JEL Products

033-7859809

You will receive a response from the person who is also preparing your lighting calculation.

A reply within one working day, from an engineer
Free lighting calculation with number of luminaires and lux
Test luminaire possible before you decide
5-year warranty on the complete luminaire

Rather direct contact

+31 (0)33 785 9809

We respond within one working day. We deliver standard items within a week. Custom work, such as a different light colour, a different CRI or a bespoke version, by arrangement.

We use your information solely to review your request and respond to it.