Market-leading high
luminous efficacy
Good site lighting is crucial for the safety, productivity and appearance of any outdoor site. Whether it is an industrial site, construction site, car park or logistics centre. At JEL Products, we offer a total solution, from lighting advice and energy calculations to installation and maintenance.
And not just for traditional lighting systems (e.g. 1000W bulbs), but also if your current LED installation fails or fails. Our latest LED technology can save up to 50% additional energy compared to standard LED solutions. Let us convince you with a customised lighting design.
Outdoor areas are constantly exposed to wind, precipitation, dust, large temperature variations and sometimes even chemical vapours. A good lighting system should therefore offer a high IP rating (for water and dust resistance) and a solid IK rating (for shock resistance). Moreover, UV radiation and corroding elements (e.g. in harbour areas) can shorten the lifetime of a luminaire if the material is not designed for this. Only robust, industrially developed LED solutions with the right coating and construction can perform for a long time in these changeable and often harsh outdoor situations.
Many sites still use conventional 1000W lamps (SON-T, HPI) or outdated LED luminaires with limited efficiency. These light sources have high energy consumption, require frequent maintenance and become increasingly difficult to replace as component production decreases. In contrast, modern LED technology delivers higher light output at lower wattage and has a much longer lifetime. This significantly reduces the Total Cost of Ownership (TCO), while making lighting more reliable and future-proof.
Inadequate or uneven light distribution increases the risk of accidents and inefficient work processes, especially on extensive sites where vehicles, people and machines cross. When visibility is insufficient, fatigue and errors increase, negatively affecting not only safety but also productivity. Quality LED site lighting with proper lux and uniformity distribution minimises those risks. The result is a working environment where staff remain more alert, fewer incidents occur and the entire operation runs smoothly.
For many industrial sites, logistics terminals and (semi)public outdoor areas, there are legal requirements around minimum levels of lighting, as laid down in EN 12464-2 for outdoor areas. Health and safety regulations also state that workplace visibility must be sufficient to prevent accidents. Moreover, light nuisance towards local residents can impose restrictions, with, for instance, NSVV guidelines helping to find the balance between well-lit workplaces and respect for the environment. A solid LED solution that meets these standards prevents fines, unsafe situations and damage to reputation.
We understand that every site is unique and has specific lighting needs. Therefore, our high-quality LED surface-mounted luminaires are only applied after creating a suitable lighting design. Because good site lighting is only possible with customisation, and when you invest in your site lighting, you do so for the long term. A lighting solution must fit into this, including:
Our DarkLicht luminaires are designed with maximum efficiency and lifetime in mind. Thanks to high build quality shared with other DCbright products, top-level components and the use of our innovative and patented reflector technology, we manage to achieve a net efficiency of 190 lm/W with our site lighting in addition to a lifetime of 196,000 hours (L80B10). This ensures that the lighting does not degrade and continues to perform consistently.
Custom light calculations
Site lighting is bespoke; as a serious business, you won't get away with simply hanging a luminaire. As an employer, you have a responsibility to provide sufficient, well-shielded work lighting for your premises. In this respect, we provide substantiated and well-considered advice.
To ensure our transparency, we have joined the NSVV Code of Conduct as a company, which means we are committed to providing transparent and thoughtful solutions for the end user.
We invite contractors and installers as well as end-users to collaborate with JEL Products. Our extensive experience and customised solutions make implementation easy and efficient. Whether you work directly within operations or are responsible for maintenance, we are ready to support you with expertise and high-quality products.
From now on, it is daylight at night at the DFDS Terminal in Vlaardingen. Once again, this move contributes to our sustainability goals with a net reduction of 53% in energy consumption and a significant improvement in visibility. Thanks to JEL Products for the fantastic collaboration.
Our location in Vierpolders has been fitted with new sustainable new lighting, we are happy with the services JEL Products provided us.
JEL Products's fully light-shielding luminaires were chosen for the new asphalt plant. The lighting works to complete satisfaction.
As a specialist in industrial LED lighting, we are ISO9001- and VCA**-certified. Whether for car parks, port areas, construction sites or logistics hubs: we have countless reference projects at home and abroad. Our lighting consultant ensures a well thought-out design, while our products are distinguished by robustness and high efficiency.
Because we use high-quality components (including from DCbright and DarkLicht), we always exceed the performance of other A-brand LED systems. So you can count on higher light output and lower consumption.
Because we use high-quality components (including from DCbright and DarkLicht), we always exceed the performance of other A-brand LED systems. So you can count on higher light output and lower consumption.
Our luminaires are so robust and carefully developed that we can offer a guarantee of up to 10 years in many cases. During this time, you can count on a consistently high light output, minimal failures and a structurally lower Total Cost of Ownership, as there are no expensive replacements and failures.
Our luminaires are so robust and carefully developed that we can offer a guarantee of up to 10 years in many cases. During this time, you can count on a consistently high light output, minimal failures and a structurally lower Total Cost of Ownership, as there are no expensive replacements and failures.
With our ISO9001 and VCA certification, we ensure quality and safety in every project. We are adept at lighting industrial sites, construction sites, ports and car parks, both nationally and internationally.
With our ISO9001 and VCA certification, we ensure quality and safety in every project. We are adept at lighting industrial sites, construction sites, ports and car parks, both nationally and internationally.
We believe that every site is unique. Therefore, we do light simulations and design specifically for your site, taking into account height, angle, desired lux values and possible light nuisance to nearby residents. This is how we gladly prove our claim of up to 50% additional energy savings.
We believe that every site is unique. Therefore, we do light simulations and design specifically for your site, taking into account height, angle, desired lux values and possible light nuisance to nearby residents. This is how we gladly prove our claim of up to 50% additional energy savings.
Are you convinced that site lighting is indispensable for your project or business?
We are happy to back up our claim to 50% additional energy savings with a no-obligation offer.
So you can immediately see the potential ROI and the improved light image.
Lucas de Graaf
Technical director
Our latest luminaires are designed to be thermally and electrically stable. We can partially reuse your existing systems or completely replace them for a more reliable and efficient solution.
This varies per activity: logistics activities can be around 30-50 lux, while high-risk activities need 100 lux or more. We assess this with you according to (inter)national guidelines.
There are several regional and national schemes (such as EIA). We will be happy to help you identify opportunities to reduce your investment.
Our luminaires can be configured with lenses or full-cutoff reflectors, minimising stray light. This helps with standards compliance around light pollution (e.g. NSVV).
Yes, we offer comprehensive support and advice throughout the process, from selection to installation and maintenance. Our team is ready to help you every step of the way.
Depending on operating hours and lamp output, a payback period of 2-4 years is often achievable. Combine this with subsidies or smart control and you save even faster.
Usually yes. We suggest the right wattage, lens/reflector and mounting height so that you get the same or better light distribution at less wattage.
We show this in a concrete lighting design and energy calculation. There are also customer cases and test set-ups that demonstrate the real savings.
Yes, we can equip our luminaires with various types of LEDs depending on your requirements. We supply our lamps with dimmable functions and different colour temperatures as standard to meet your specific testing requirements.
Discover the power of JEL Products and its industrial LED lighting solutions for greater savings in energy, costs, and CO2 emissions while improving your work safety. Contact us today by filling in the form below so we can support you in lighting your working environment in the best possible way.
