In hot and humid industrial environments, you need at least IP65 for your lighting. For environments with steam, water jets or aggressive cleaning, IP66 or higher is the safe choice. In situations with extreme heat or infrared radiation, the IP rating plays only one role: the housing must also be thermally resistant, because a high IP rating does not automatically protect against heat.
Below we answer the most frequently asked questions about IP ratings for industrial lighting, so you know exactly which protection rating suits your environment.
What does an IP rating mean for industrial lighting?
An IP rating, short for Ingress Protection, indicates the extent to which a luminaire is protected against the ingress of solid particles and liquids. The two digits after “IP” each tell their own story: the first digit stands for dust protection (scale 0 to 6), the second for water protection (scale 0 to 9).
In industrial lighting, the IP rating is not a side issue. A luminaire that is not properly sealed draws in moisture. That moisture condenses on the electronics, corrodes contacts and drastically shortens the lifetime. In environments with dust, sawdust, metal particles or chemical fumes the same applies, but then for the first digit.
What many people do not know: the IP rating says nothing about shock resistance, temperature resistance or corrosion resistance. Other characteristics are relevant for those, such as the IK rating for mechanical impact and the choice of housing material. An IP and IK rating therefore complement each other.
What is the minimum IP rating required in damp environments?
For damp industrial environments, IP65 is the absolute minimum. This level of protection means that the luminaire is completely dust-tight and resistant to water jets from any direction. In most production environments, warehouses and workshops with splashing water or condensation, this is sufficient.
As soon as high-pressure washing, steam cleaning or direct exposure to higher-pressure water jets is involved, IP66 or IP67 is more suitable. Think of slaughterhouses, car washes, food processing companies or cold stores that are regularly cleaned with water.
A handy guideline per type of environment:
- Dry production hall with condensation risk: IP54 to IP65
- Damp work area, splashing water: IP65
- High-pressure washing or steam cleaning: IP66
- Temporary immersion possible: IP67
- Outdoor locations with rain and dust: at least IP65, IP66 when exposed to powerful water jets
In environments with steam or aggressive chemicals, the IP rating is not the only criterion, by the way. The choice of housing material, such as stainless steel or specially coated aluminium, also determines how long a luminaire lasts.
Which IP rating do you need with extreme heat or infrared radiation?
With extreme heat or intense infrared radiation, a high IP rating is necessary but not sufficient on its own. The luminaire’s seal must withstand high temperatures, because standard rubber or silicone gaskets degrade under prolonged exposure to heat and can start to leak.
In environments such as steelworks, foundries or industries with hot process flows, luminaires are exposed to temperatures that regular LED luminaires simply cannot handle. Infrared radiation heats the housing from the outside, while the LED driver produces heat from the inside. That combination is fatal for standard luminaires.
For this kind of application, you look not only at the IP rating, but also at the maximum ambient temperature (Ta) stated by the manufacturer. Luminaires for steelworks sometimes have to function at ambient temperatures up to +120°C. In that case, specialised solutions are required, such as those found in High-temperature lighting.
What is the difference between IP65, IP66, and IP67?
The difference lies solely in the degree of water protection. All three ratings are completely dust-tight (the first digit, 6, is the maximum). The second digit determines how much water the luminaire can withstand:
- IP65 Protected against low-pressure water jets from any direction. Suitable for environments with splashing water, rain and condensation.
- IP66: Protected against powerful water jets and high pressure from any direction. Suitable for high-pressure washing and heavy rainfall.
- IP67: Protected against temporary immersion in water up to 1 metre deep for a maximum of 30 minutes. Suitable when there is a chance that a luminaire will briefly be under water.
A common misconception is that IP67 is always better than IP66. That is not true. IP66 actually offers higher resistance to powerful water jets than IP67, because IP67 focuses on immersion, not pressure. In practice, many manufacturers opt for a combination such as IP66/67 to cover both scenarios.
For most industrial applications outdoors and in damp halls, IP66 is the most complete choice. IP67 is particularly relevant for luminaires mounted in trenches, pits or low-lying installations.
When is an IP rating alone not enough?
An IP rating only protects against dust and water. In heavy industry, however, there are situations in which that is only one of many challenges. Corrosion, mechanical shock, explosion hazards and extreme temperatures fall outside the scope of the IP classification.
Situations in which you need to look beyond the IP rating:
- Corrosive environments Sea air, acids or chemical fumes attack aluminium and standard coatings. Stainless steel or a special protective layer is necessary here.
- Explosion Hazard In ATEX zones (zones with explosive gases or dust), ATEX certification is mandatory, regardless of the IP rating.
- Mechanical load Vibration from machines, cranes or vehicles calls for a high IK rating and robust mounting.
- Extreme temperatures Both extreme cold (climate chambers down to -45°C) and extreme heat require thermally validated luminaires.
In short: the IP rating is a basic requirement, not a complete solution. In demanding environments, it is always the combination of IP rating, choice of materials, thermal design and any safety certification that determines whether a luminaire is really suitable.
Practical example: Farm Frites
Farm Frites was dealing with LED lighting that failed repeatedly in the drying tunnels and production ovens. The luminaires chosen earlier could not withstand the high thermal stress and the intensive cleaning routine. For the freezing tunnels, the solution also had to withstand a temperature range of -40 °C to +70 °C during the cleaning processes. For this project, a special food-grade version of the stainless steel Snapper HT was developed: the Snapper HT-SS, with borosilicate glass, a HACCP-compliant design and IP69K protection. 78 luminaires were supplied, achieving 200 to 500 lux in the oven at 35 W per luminaire.
IP69K was chosen here not as the highest number on a datasheet, but because cleaning takes place at high pressure and high temperature. A seal that is watertight at room temperature must remain so after repeated transitions between heat, cold and cleaning water. The IP rating, together with the choice of housing and glass material and the thermal design, therefore determines whether a luminaire holds up in a hot and humid environment.
Read more about the Farm Frites project
How JEL Products helps with IP ratings and industrial lighting
JEL Products advises on and supplies lighting solutions for environments where standard luminaires fall short. Whether it is a steamy production hall, an outdoor site with sea air or an installation close to a heat source: the right IP rating is the starting point, but never the only criterion.
Specifically, JEL Products offers:
- Technical advice on the right IP rating and choice of materials for your specific environment
- Luminaires with proven performance in extreme conditions, including high temperatures, corrosion and vibration
- Complete lighting solutions including engineering, installation and commissioning
- Specialist knowledge of climate chambers and high-temperature environments; for ATEX zones, lighting for the parts of the site outside the zones, with referral to a certified Ex manufacturer for the zones themselves
- Products designed and produced in the Netherlands, with ISO9001 and VCA** certification
Not sure which protection rating your situation requires? Then get in touch via the JEL Products Contact Page for a no-obligation technical discussion.